Add mmio mdio mux nodes from the on-board FPGA. Signed-off-by: Li Yang <leoyang.li@xxxxxxx> --- .../boot/dts/freescale/fsl-ls2080a-qds.dts | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index f6c3ee78ace0..c3caca1c0ab6 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -23,3 +23,72 @@ chosen { stdout-path = "serial0:115200n8"; }; }; + +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */ +&dpmac9 { + phy-handle = <&mdio0_phy12>; + phy-connection-type = "sgmii"; +}; + +&dpmac10 { + phy-handle = <&mdio0_phy13>; + phy-connection-type = "sgmii"; +}; + +&dpmac11 { + phy-handle = <&mdio0_phy14>; + phy-connection-type = "sgmii"; +}; + +&dpmac12 { + phy-handle = <&mdio0_phy15>; + phy-connection-type = "sgmii"; +}; + +&ifc { + boardctrl: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-mfd"; + reg = <3 0 0x300>; + ranges = <0 3 0 0x300>; + + mdio_mux_emi1 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&emdio1>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1_MDIO */ + + #address-cells=<1>; + #size-cells = <0>; + + /* Child MDIO buses, one for each riser card: + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0. + * VSC8234 PHYs on the riser cards. + */ + + mdio_mux3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + + mdio0_phy12: mdio_phy0@1c { + reg = <0x1c>; + }; + + mdio0_phy13: mdio_phy1@1d { + reg = <0x1d>; + }; + + mdio0_phy14: mdio_phy2@1e { + reg = <0x1e>; + }; + + mdio0_phy15: mdio_phy3@1f { + reg = <0x1f>; + }; + }; + }; + }; +}; + -- 2.25.1