[PATCH v2 09/12] ARM: dts: suniv: licheepi-nano: add microSD card

[Andre Przywara <andre.przywara@xxxxxxx>]

From: Jesse Taube <mr.bossman075@xxxxxxxxx>

Enable MMC0 and supply the board setting to enable the microSD card slot
on the LicheePi Nano board.
Apart from the always missing write protect switch on microSD slots,
the card-detect pin is not connected to anything, so we use the
broken-cd property.

Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx>
[Andre: add alias and vmmc supply]
Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
Acked-by: Samuel Holland <samuel@xxxxxxxxxxxx>
Tested-by: Samuel Holland <samuel@xxxxxxxxxxxx>
---
 .../arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
index a1154e6c7cb5..8fa79a1d1d2d 100644
--- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -11,12 +11,28 @@ / {
 	compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
 
 	aliases {
+		mmc0 = &mmc0;
 		serial0 = &uart0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reg_vcc3v3: vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&mmc0 {
+	broken-cd;
+	bus-width = <4>;
+	disable-wp;
+	status = "okay";
+	vmmc-supply = <&reg_vcc3v3>;
 };
 
 &uart0 {
-- 
2.25.1