From: Jesse Taube <mr.bossman075@xxxxxxxxx> Include clock and reset macros and replace magic numbers. Signed-off-by: Jesse Taube <Mr.Bossman075@xxxxxxxxx> Reviewed-by: Andre Przywara <andre.przywara@xxxxxxx> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> Acked-by: Samuel Holland <samuel@xxxxxxxxxxxx> --- arch/arm/boot/dts/suniv-f1c100s.dtsi | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index def830101448..922efd5e9457 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -4,6 +4,9 @@ * Copyright 2018 Mesih Kilinc <mesihkilinc@xxxxxxxxx> */ +#include <dt-bindings/clock/suniv-ccu-f1c100s.h> +#include <dt-bindings/reset/suniv-ccu-f1c100s.h> + / { #address-cells = <1>; #size-cells = <1>; @@ -82,7 +85,7 @@ pio: pinctrl@1c20800 { compatible = "allwinner,suniv-f1c100s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <38>, <39>, <40>; - clocks = <&ccu 37>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; clock-names = "apb", "hosc", "losc"; gpio-controller; interrupt-controller; @@ -116,8 +119,8 @@ uart0: serial@1c25000 { interrupts = <1>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 38>; - resets = <&ccu 24>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; status = "disabled"; }; @@ -127,8 +130,8 @@ uart1: serial@1c25400 { interrupts = <2>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 39>; - resets = <&ccu 25>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; status = "disabled"; }; @@ -138,8 +141,8 @@ uart2: serial@1c25800 { interrupts = <3>; reg-shift = <2>; reg-io-width = <4>; - clocks = <&ccu 40>; - resets = <&ccu 26>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; status = "disabled"; }; }; -- 2.25.1