Am Dienstag, 9. September 2014, 10:27:17 schrieb Zhang Rui:
> On Thu, 2014-09-04 at 09:02 +0800, Caesar Wang wrote:
> > 在 2014年09月03日 16:07, Heiko Stübner 写道:
> > > Am Mittwoch, 3. September 2014, 10:10:37 schrieb Caesar Wang:
> > >> This add the necessary binding documentation for the thermal
> > >> found on Rockchip SoCs
> > >>
> > >> Signed-off-by: zhaoyifeng <zyf@xxxxxxxxxxxxxx>
> > >> Signed-off-by: Caesar Wang <caesar.wang@xxxxxxxxxxxxxx>
> > >> ---
> > >>
> > >> .../devicetree/bindings/thermal/rockchip-thermal.txt | 20
> > >>
> > >> ++++++++++++++++++++ 1 file changed, 20 insertions(+)
> > >>
> > >> create mode 100644
> > >>
> > >> Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> > >>
> > >> diff --git
> > >> a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> > >> b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt new
> > >> file
> > >> mode 100644
> > >> index 0000000..1ed4d4c
> > >> --- /dev/null
> > >> +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt
> > >> @@ -0,0 +1,20 @@
> > >> +* Temperature Sensor ADC (TSADC) on rockchip SoCs
> > >> +
> > >> +Required properties:
> > >> +- compatible: "rockchip,rk3288-tsadc"
> > >> +- reg: physical base address of the controller and length of memory
> > >> mapped
> > >> + region.
> > >> +- interrupts: The interrupt number to the cpu. The interrupt specifier
> > >> format + depends on the interrupt controller.
> > >> +- clocks: Must contain an entry for each entry in clock-names.
> > >> +- clock-names: Shall be "tsadc" for the converter-clock, and
> > >> "apb_pclk" for + the peripheral clock.
> > >
> > > You're using the passive-temp, critical-temp and force-shut-temp
> > > properties in your driver without declaring them here.
> >
> > frankly,the about are need be declared. but there are 4 types[0] for
> > trip in thermal framework,
> > there is no force-shut for me. So I want to change it three additional
> > properties in [PATCH V4 4/4],
> >
> >
> > [0]
> > {
> >
> > THERMAL_TRIP_CRITICAL,
> > THERMAL_TRIP_HOT,
> > THERMAL_TRIP_PASSIVE,
> > THERMAL_TRIP_ACTIVE,
> >
> > }
>
> this sounds reasonable to me.
>
> > > But more importantly, please use the generic trip-points for this. I
> > > guess it shouldn't be a problem to introduce a "forced-shutdown"
> > > trippoint [0] for the additional trip-point you have - thermal
> > > maintainers, please shout if I'm wrong :-)
>
> what is the difference between a critical trip point and a
> "forced-shutdown" trip point?
> Thermal core will do a shutdown in case the critical trip point is
> triggered.
The forced-shutdown is where the thermal controller is supposed to also do a
shutdown in hardware. As you said the thermal core will also shutdown at the
critical trip point, I guess we could map Caesar's value like
trip-point tsadc
critical forced-shutdown (the 120 degrees in patch 4)
hot critical (the 100 degrees)
...
>
> thanks,
> rui
>
> > It's a good option.
> > I can send a patch,but I don't know whether the thermal maintainers will
> > accept it.
> >
> > Maybe,they have a better way to suggest it.:-)
> >
> >
> > PS:I will sent a new patch If I still have no received their suggestions
> > in two days.
> >
> > > Heiko
> > >
> > >
> > > [0] in a separate patch, changing
> > > - thermal_trip_type enum in include/linux/thermal.h
> > > - trip_types mapping in drivers/thermal/of-thermal.c
> > > - Documentation/devicetree/bindings/thermal/thermal.txt
> > >
> > >> +
> > >> +Example:
> > >> +tsadc: tsadc@ff280000 {
> > >> + compatible = "rockchip,rk3288-tsadc";
> > >> + reg = <0xff280000 0x100>;
> > >> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> > >> + clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> > >> + clock-names = "tsadc", "apb_pclk";
> > >> +};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
