In some SGMII use cases where both an external PHY and the internal
PCS/PMA PHY need to be configured, we should explicitly use a phandle
"pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the driver
would use "phy-handle" in the DT as the reference to both external and
the internal PCS/PMA PHY.
In other cases where the core is connected to a SFP cage, we could
fallback, pointing phy-handle to the intenal PCS/PMA PHY, and let the
driver connect to the SFP module, if exist, via phylink.
Fixes: 1a02556086fc (net: axienet: Properly handle PCS/PMA PHY for 1000BaseX mode)
Signed-off-by: Andy Chiu <andy.chiu@xxxxxxxxxx>
Reviewed-by: Greentime Hu <greentime.hu@xxxxxxxxxx>
---
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 6fd5157f0a6d..17de81cc0ca5 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -2078,7 +2078,13 @@ static int axienet_probe(struct platform_device *pdev)
ret = -EINVAL;
goto cleanup_mdio;
}
- lp->pcs_phy = of_mdio_find_device(lp->phy_node);
+ np = of_parse_phandle(pdev->dev.of_node, "pcs-handle", 0);
+ if (np) {
+ lp->pcs_phy = of_mdio_find_device(np);
+ of_node_put(np);
+ } else {
+ lp->pcs_phy = of_mdio_find_device(lp->phy_node);
+ }
if (!lp->pcs_phy) {
ret = -EPROBE_DEFER;
goto cleanup_mdio;
--
2.34.1
