[PATCH v1 04/10] arm64: dts: mediatek: asurada: Enable and configure I2C and SPI busses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Asurada platform has five I2C controllers and two SPI controllers
that are used. In preparation for enabling the devices connected to
these controllers, enable and configure their busses.

Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxx>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---

 .../boot/dts/mediatek/mt8192-asurada.dtsi     | 130 ++++++++++++++++++
 1 file changed, 130 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
index 5cb7580a13cf..3c5b1e475cf6 100644
--- a/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi
@@ -85,6 +85,47 @@ ppvar_sys: ppvar-sys {
 	};
 };
 
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+};
+
+&i2c2 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	clock-stretch-ns = <12600>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
+&i2c7 {
+	status = "okay";
+
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_pins>;
+};
+
 &pio {
 	/* 220 lines */
 	gpio-line-names = "I2S_DP_LRCK",
@@ -311,6 +352,95 @@ &pio {
 			  "AUD_DAT_MOSI1",
 			  "AUD_DAT_MISO0",
 			  "AUD_DAT_MISO1";
+
+	i2c0_pins: i2c0-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO204__FUNC_SCL0>,
+				 <PINMUX_GPIO205__FUNC_SDA0>;
+			bias-pull-up;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	i2c1_pins: i2c1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO118__FUNC_SCL1>,
+				 <PINMUX_GPIO119__FUNC_SDA1>;
+			bias-pull-up;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	i2c2_pins: i2c2-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO141__FUNC_SCL2>,
+				 <PINMUX_GPIO142__FUNC_SDA2>;
+			bias-pull-up;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <0>;
+		};
+	};
+
+	i2c3_pins: i2c3-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO160__FUNC_SCL3>,
+				 <PINMUX_GPIO161__FUNC_SDA3>;
+			bias-disable;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	i2c7_pins: i2c7-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO124__FUNC_SCL7>,
+				 <PINMUX_GPIO125__FUNC_SDA7>;
+			bias-disable;
+			mediatek,drive-strength-adv = <7>;
+		};
+	};
+
+	spi1_pins: spi1-default-pins {
+		pins-cs-mosi-clk {
+			pinmux = <PINMUX_GPIO157__FUNC_SPI1_A_CSB>,
+				 <PINMUX_GPIO159__FUNC_SPI1_A_MO>,
+				 <PINMUX_GPIO156__FUNC_SPI1_A_CLK>;
+			bias-disable;
+		};
+
+		pins-miso {
+			pinmux = <PINMUX_GPIO158__FUNC_SPI1_A_MI>;
+			bias-pull-down;
+		};
+	};
+
+	spi5_pins: spi5-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO38__FUNC_SPI5_A_MI>,
+				 <PINMUX_GPIO37__FUNC_GPIO37>,
+				 <PINMUX_GPIO39__FUNC_SPI5_A_MO>,
+				 <PINMUX_GPIO36__FUNC_SPI5_A_CLK>;
+			bias-disable;
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+};
+
+&spi5 {
+	status = "okay";
+
+	cs-gpios = <&pio 37 GPIO_ACTIVE_LOW>;
+	mediatek,pad-select = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi5_pins>;
 };
 
 &uart0 {
-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux