Hi Kishon, ok will be fix to v3 BR Gabriel On 8 September 2014 16:33, Kishon Vijay Abraham I <kishon@xxxxxx> wrote: > Hi, > > On Wednesday 03 September 2014 09:07 PM, Gabriel FERNANDEZ wrote: >> The MiPHY28lp is a Generic PHY which can serve various SATA or PCIe >> or USB3 devices. >> >> Signed-off-by: alexandre torgue <alexandre.torgue@xxxxxx> >> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@xxxxxx> >> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@xxxxxxxxxx> >> --- >> .../devicetree/bindings/phy/phy-miphy28lp.txt | 126 +++++++++++++++++++++ >> 1 file changed, 126 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/phy/phy-miphy28lp.txt >> >> diff --git a/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt >> new file mode 100644 >> index 0000000..5e307af >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/phy/phy-miphy28lp.txt >> @@ -0,0 +1,126 @@ >> +STMicroelectronics STi MIPHY28LP PHY binding >> +============================================ >> + >> +This binding describes a miphy device that is used to control PHY hardware >> +for SATA, PCIe or USB3. >> + >> +Required properties (controller (parent) node): >> +- compatible : Should be "st,miphy28lp-phy" >> +- st,syscfg : Should be a phandle of the system configuration register group >> + which contain the SATA, PCIe or USB3 mode setting bits >> + >> +Required nodes : A sub-node is required for each channel the controller >> + provides. Address range information including the usual >> + 'reg' and 'reg-names' properties are used inside these >> + nodes to describe the controller's topology. These nodes >> + are translated by the driver's .xlate() function. >> + >> +Required properties (port (child) node): >> +- #phy-cells : Should be 1 (See second example) >> + Cell after port phandle is device type from: >> + - MIPHY_TYPE_SATA >> + - MIPHY_TYPE_PCI >> + - MIPHY_TYPE_USB3 >> +- reg : Address and length of the register set for the device >> +- reg-names : The names of the register addresses corresponding to the registers >> + filled in "reg". Is can also contain the offset of the system configuration > > %s/Is/It > > Thanks > Kishon -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
