The Colibri iMX6 HW doesn't allow to use the PWR_ON_REQ signal for
poweroff. Use the fsl,pmic-stby-poweroff property to command the PMIC
into a low power mode in poweroff.
Signed-off-by: Max Krummenacher <max.krummenacher@xxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-colibri.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index f6243762e918..da52a71bb6e7 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -138,6 +138,10 @@
status = "disabled";
};
+&clks {
+ fsl,pmic-stby-poweroff;
+};
+
/* Colibri SSP */
&ecspi4 {
cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
@@ -403,6 +407,7 @@
pmic: pfuze100@8 {
compatible = "fsl,pfuze100";
+ fsl,pmic-stby-poweroff;
reg = <0x08>;
regulators {
--
2.20.1
