Describe the SerDes block #1 using the generic phys infrastructure. This
way, the ethernet nodes can each reference their serdes lanes
individually using the 'phys' dts property.
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
- none
Changes in v3:
- none
Changes in v4:
- 8/8: remove the DT nodes for each lane and the lane id in the
phys phandle
arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi | 4 ++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index 17f8e733972a..41702e7386e3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -63,21 +63,25 @@ sfp3: sfp-3 {
&dpmac7 {
sfp = <&sfp0>;
managed = "in-band-status";
+ phys = <&serdes_1 3>;
};
&dpmac8 {
sfp = <&sfp1>;
managed = "in-band-status";
+ phys = <&serdes_1 2>;
};
&dpmac9 {
sfp = <&sfp2>;
managed = "in-band-status";
+ phys = <&serdes_1 1>;
};
&dpmac10 {
sfp = <&sfp3>;
managed = "in-band-status";
+ phys = <&serdes_1 0>;
};
&emdio2 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 7032505f5ef3..92a881302708 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -612,6 +612,12 @@ soc {
ranges;
dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+ serdes_1: phy@1ea0000 {
+ compatible = "fsl,lynx-28g";
+ reg = <0x0 0x1ea0000 0x0 0x1e30>;
+ #phy-cells = <1>;
+ };
+
crypto: crypto@8000000 {
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
fsl,sec-era = <10>;
--
2.33.1
