The logic to setup the supported interfaces will get annotated based on
what the configuration of the SerDes PLLs supports. Move the current
setup into a separate function just to try to keep it clean.
Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
- none
Changes in v3:
- none
.../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 43 +++++++++++--------
1 file changed, 24 insertions(+), 19 deletions(-)
diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
index c4a49bf10156..e6e758eaafea 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
@@ -257,6 +257,29 @@ static void dpaa2_pcs_destroy(struct dpaa2_mac *mac)
}
}
+static void dpaa2_mac_set_supported_interfaces(struct dpaa2_mac *mac)
+{
+ /* We support the current interface mode, and if we have a PCS
+ * similar interface modes that do not require the SerDes lane to be
+ * reconfigured.
+ */
+ __set_bit(mac->if_mode, mac->phylink_config.supported_interfaces);
+ if (mac->pcs) {
+ switch (mac->if_mode) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_SGMII:
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX,
+ mac->phylink_config.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_SGMII,
+ mac->phylink_config.supported_interfaces);
+ break;
+
+ default:
+ break;
+ }
+ }
+}
+
int dpaa2_mac_connect(struct dpaa2_mac *mac)
{
struct net_device *net_dev = mac->net_dev;
@@ -305,25 +328,7 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD | MAC_5000FD |
MAC_10000FD;
- /* We support the current interface mode, and if we have a PCS
- * similar interface modes that do not require the PLLs to be
- * reconfigured.
- */
- __set_bit(mac->if_mode, mac->phylink_config.supported_interfaces);
- if (mac->pcs) {
- switch (mac->if_mode) {
- case PHY_INTERFACE_MODE_1000BASEX:
- case PHY_INTERFACE_MODE_SGMII:
- __set_bit(PHY_INTERFACE_MODE_1000BASEX,
- mac->phylink_config.supported_interfaces);
- __set_bit(PHY_INTERFACE_MODE_SGMII,
- mac->phylink_config.supported_interfaces);
- break;
-
- default:
- break;
- }
- }
+ dpaa2_mac_set_supported_interfaces(mac);
phylink = phylink_create(&mac->phylink_config,
dpmac_node, mac->if_mode,
--
2.33.1
