Add the missing pin groups:
jtag, wdt
Add the missing functions:
i2s, jtag, pcie refclk, pcie rst, pcm, spdif2, spdif3, wdt refclk, wdt rst
Sort pin groups and functions in alphabetical order. Fix a typo.
Signed-off-by: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
---
I didn't know the order to put the missing groups and functions so I sorted
them in alphabetical order, let me know if it's not ok.
Arınç
---
.../bindings/pinctrl/ralink,rt2880-pinmux.yaml | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
index f0c52feb24d7..9de8b0c075e2 100644
--- a/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml
@@ -10,7 +10,7 @@ maintainers:
- Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
description:
- The rt2880 pinmux can only set the muxing of pin groups. muxing indiviual pins
+ The rt2880 pinmux can only set the muxing of pin groups. Muxing indiviual pins
is not supported. There is no pinconf support.
properties:
@@ -29,12 +29,13 @@ patternProperties:
properties:
groups:
description: Name of the pin group to use for the functions.
- enum: [i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2, mdio,
- pcie, sdhci]
+ enum: [i2c, jtag, mdio, pcie, rgmii1, rgmii2, sdhci, spi,
+ uart1, uart2, uart3, wdt]
function:
description: The mux function to select
- enum: [gpio, i2c, spi, uart1, uart2, uart3, rgmii1, rgmii2,
- mdio, nand1, nand2, sdhci]
+ enum: [gpio, i2c, i2s, jtag, mdio, nand1, nand2, pcie refclk,
+ pcie rst, pcm, rgmii1, rgmii2, sdhci, spdif2, spdif3,
+ spi, uart1, uart2, uart3, wdt refclk, wdt rst]
required:
- groups
--
2.25.1
