Add CPSW and MDIO related device tree data for DRA7XX and made as status
disabled. Phy-id, pinmux for active and sleep state needs to be added in
board dts files and enable the CPSW device.
Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
arch/arm/boot/dts/dra7.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index b6060d3..d588c1e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -34,6 +34,8 @@
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ ethernet0 = &cpsw_emac0;
+ ethernet1 = &cpsw_emac1;
};
timer {
@@ -1134,6 +1136,63 @@
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
+
+ mac: ethernet@4a100000 {
+ compatible = "ti,cpsw";
+ ti,hwmods = "gmac";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ no_bd_ram = <0>;
+ rx_descs = <64>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0x48484000 0x1000
+ 0x48485200 0x2E00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * rx_thresh_pend
+ * rx_pend
+ * tx_pend
+ * misc_pend
+ */
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ status = "disabled";
+
+ davinci_mdio: mdio@48485000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ reg = <0x48485000 0x100>;
+ };
+
+ cpsw_emac0: slave@48480200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpsw_emac1: slave@48480300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ phy_sel: cpsw-phy-sel@4a002554 {
+ compatible = "ti,dra7xx-cpsw-phy-sel";
+ reg= <0x4a002554 0x4>;
+ reg-names = "gmii-sel";
+ };
+ };
+
};
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
