Adding device tree entry for CPSW to make it work in Dual EMAC mode. These patches were tested with DRA7 hwmod patches on top of linux-next. The patches were already reviewed [1] and has been waiting for cross bar and hwmod to be pulled in. Now since all dependent patches has already pulled in, so reposting the patches again. Patches are tested on linux-next, the boot logs on DRA7xx EVM [2] [1] https://lkml.org/lkml/2014/5/13/89 [2] http://slexy.org/view/s2YqO0Wj9b Mugunthan V N (3): pinctrl: dra7: dt-bindings: add pin off modes for dra7 SoC arm/dts: dra7xx: Add CPSW and MDIO module nodes for dra7xx arm/dts: dra7xx: Enable CPSW and MDIO for dra7xx EVM arch/arm/boot/dts/dra7-evm.dts | 107 ++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/dra7.dtsi | 59 +++++++++++++++++++++ include/dt-bindings/pinctrl/dra.h | 8 +++ 3 files changed, 174 insertions(+) -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
