On Wed, 09 Mar 2022 19:27:42 +0200, Ioana Ciornei wrote: > Describe the "fsl,lynx-28g" compatible used by the Lynx 28G SerDes PHY > driver on Layerscape based SoCs. > > Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx> > --- > Changes in v2: > - none > > .../devicetree/bindings/phy/fsl,lynx-28g.yaml | 71 +++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: example-0: serdes_phy@1ea0000:reg:0: [0, 32112640, 0, 7728] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy@1ea0000: #phy-cells:0:0: 0 was expected From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.example.dt.yaml: serdes_phy@1ea0000: '#address-cells', '#size-cells', 'phy@0', 'phy@1', 'phy@2', 'phy@3', 'phy@4', 'phy@5', 'phy@6', 'phy@7' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/fsl,lynx-28g.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1603505 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
