On 07/03/2022 14:03, Sergiu Moga wrote:
> Convert PWM binding for Atmel/Microchip SoCs to Device Tree Schema
> format.
>
> Signed-off-by: Sergiu Moga <sergiu.moga@xxxxxxxxxxxxx>
> ---
> .../devicetree/bindings/pwm/atmel-pwm.txt | 35 -----------
> .../devicetree/bindings/pwm/atmel-pwm.yaml | 62 +++++++++++++++++++
> 2 files changed, 62 insertions(+), 35 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.txt
> create mode 100644 Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
>
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
> deleted file mode 100644
> index fbb5325be1f0..000000000000
> --- a/Documentation/devicetree/bindings/pwm/atmel-pwm.txt
I would prefer for new files to switch to common DT conversion:
vendor,name.yaml
You have there another PWM bindings for Atmel, so the name should not be
just "pwm" but something more specific, maybe "at91sam-pwm"?
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -Atmel PWM controller
> -
> -Required properties:
> - - compatible: should be one of:
> - - "atmel,at91sam9rl-pwm"
> - - "atmel,sama5d3-pwm"
> - - "atmel,sama5d2-pwm"
> - - "microchip,sam9x60-pwm"
> - - reg: physical base address and length of the controller's registers
> - - #pwm-cells: Should be 3. See pwm.yaml in this directory for a
> - description of the cells format.
> -
> -Example:
> -
> - pwm0: pwm@f8034000 {
> - compatible = "atmel,at91sam9rl-pwm";
> - reg = <0xf8034000 0x400>;
> - #pwm-cells = <3>;
> - };
> -
> - pwmleds {
> - compatible = "pwm-leds";
> -
> - d1 {
> - label = "d1";
> - pwms = <&pwm0 3 5000 0>
> - max-brightness = <255>;
> - };
> -
> - d2 {
> - label = "d2";
> - pwms = <&pwm0 1 5000 1>
> - max-brightness = <255>;
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
> new file mode 100644
> index 000000000000..f5378a2226bd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pwm/atmel-pwm.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pwm/atmel-pwm.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Atmel PWM controller
title: Atmel/Microchip PWM controller
> +
> +maintainers:
> + - Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> +
allOf including pwm.yaml
> +properties:
> + compatible:
> + enum:
> + - atmel,at91sam9rl-pwm
> + - atmel,sama5d3-pwm
> + - atmel,sama5d2-pwm
> + - microchip,sam9x60-pwm
> +
> + reg:
> + description: |
> + Physical base address and length of the controller's
> + registers
Skip description, it's obvious.
> + maxItems: 1
> +
> + "#pwm-cells":
> + description: |
> + Should be 3. See pwm.yaml in this directory for a
> + description of the cells format.
Skip description, it's obvious.
> + const: 3
> +
> +required:
> + - compatible
> + - reg
> + - "#pwm-cells"
Skip pwm-cells, required by pwm.yaml.
> +
> +additionalProperties: true
> +
> +examples:
> + - |
> + pwm0: pwm@f8034000 {
> + compatible = "atmel,at91sam9rl-pwm";
> + reg = <0xf8034000 0x400>;
> + #pwm-cells = <3>;
> + };
> +
> + pwmleds {
Skip this node. No actual benefit. All clients are the same.
> + compatible = "pwm-leds";
> +
> + led-1 {
> + label = "led-1";
> + pwms = <&pwm0 3 5000 0>;
> + max-brightness = <255>;
> + };
> +
> + led-2 {
> + label = "led-2";
> + pwms = <&pwm0 1 5000 1>;
> + max-brightness = <255>;
> + };
> + };
Best regards,
Krzysztof
