Re: [PATCH v9 06/12] ARM: integrator: Correct usage of of_pci_range_to_resource()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Sep 05, 2014 at 11:08:20PM +0100, Bjorn Helgaas wrote:
> [+cc Linus]
> 
> On Tue, Aug 12, 2014 at 05:25:19PM +0100, Liviu Dudau wrote:
> > Previously, of_pci_range_to_resource() would return a resource
> > that contained physical addresses of the IO space even if the
> > IORESOURCE_IO flags mandate a logical port set of values. Now
> > that the function has been fixed we need to update the drivers
> > that were taking advantage of the old behaviour.
> > 
> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > Cc: Arnd Bergmann <arnd@xxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Russell King <linux@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> 
> Something's wrong with the CC: list.  You list Linus here in the changelog,
> but I don't see him in the CC: headers.

Yes, turns out one of my .git/config directories had supresscc=all.

Best regards,
Liviu

> 
> > ---
> >  arch/arm/mach-integrator/pci_v3.c | 24 +++++++++++++-----------
> >  1 file changed, 13 insertions(+), 11 deletions(-)
> > 
> > diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
> > index 05e1f73..193b7f8 100644
> > --- a/arch/arm/mach-integrator/pci_v3.c
> > +++ b/arch/arm/mach-integrator/pci_v3.c
> > @@ -660,6 +660,7 @@ static void __init pci_v3_preinit(void)
> >  {
> >  	unsigned long flags;
> >  	unsigned int temp;
> > +	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
> >  
> >  	pcibios_min_mem = 0x00100000;
> >  
> > @@ -701,7 +702,7 @@ static void __init pci_v3_preinit(void)
> >  	/*
> >  	 * Setup window 2 - PCI IO
> >  	 */
> > -	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_mem.start) |
> > +	v3_writel(V3_LB_BASE2, v3_addr_to_lb_base2(io_address) |
> >  			V3_LB_BASE_ENABLE);
> >  	v3_writew(V3_LB_MAP2, v3_addr_to_lb_map2(0));
> >  
> > @@ -742,6 +743,7 @@ static void __init pci_v3_preinit(void)
> >  static void __init pci_v3_postinit(void)
> >  {
> >  	unsigned int pci_cmd;
> > +	phys_addr_t io_address = pci_pio_to_address(io_mem.start);
> >  
> >  	pci_cmd = PCI_COMMAND_MEMORY |
> >  		  PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
> > @@ -758,7 +760,7 @@ static void __init pci_v3_postinit(void)
> >  		       "interrupt: %d\n", ret);
> >  #endif
> >  
> > -	register_isa_ports(non_mem.start, io_mem.start, 0);
> > +	register_isa_ports(non_mem.start, io_address, 0);
> >  }
> >  
> >  /*
> > @@ -867,33 +869,33 @@ static int __init pci_v3_probe(struct platform_device *pdev)
> >  
> >  	for_each_of_pci_range(&parser, &range) {
> >  		if (!range.flags) {
> > -			of_pci_range_to_resource(&range, np, &conf_mem);
> > +			ret = of_pci_range_to_resource(&range, np, &conf_mem);
> >  			conf_mem.name = "PCIv3 config";
> >  		}
> >  		if (range.flags & IORESOURCE_IO) {
> > -			of_pci_range_to_resource(&range, np, &io_mem);
> > +			ret = of_pci_range_to_resource(&range, np, &io_mem);
> > +			dev_info(&pdev->dev, "IO PCI range converted\n");
> >  			io_mem.name = "PCIv3 I/O";
> >  		}
> >  		if ((range.flags & IORESOURCE_MEM) &&
> >  			!(range.flags & IORESOURCE_PREFETCH)) {
> >  			non_mem_pci = range.pci_addr;
> >  			non_mem_pci_sz = range.size;
> > -			of_pci_range_to_resource(&range, np, &non_mem);
> > +			ret = of_pci_range_to_resource(&range, np, &non_mem);
> >  			non_mem.name = "PCIv3 non-prefetched mem";
> >  		}
> >  		if ((range.flags & IORESOURCE_MEM) &&
> >  			(range.flags & IORESOURCE_PREFETCH)) {
> >  			pre_mem_pci = range.pci_addr;
> >  			pre_mem_pci_sz = range.size;
> > -			of_pci_range_to_resource(&range, np, &pre_mem);
> > +			ret = of_pci_range_to_resource(&range, np, &pre_mem);
> >  			pre_mem.name = "PCIv3 prefetched mem";
> >  		}
> > -	}
> >  
> > -	if (!conf_mem.start || !io_mem.start ||
> > -	    !non_mem.start || !pre_mem.start) {
> > -		dev_err(&pdev->dev, "missing ranges in device node\n");
> > -		return -EINVAL;
> > +		if (ret < 0) {
> > +			dev_err(&pdev->dev, "missing ranges in device node\n");
> > +			return -EINVAL;
> > +		}
> >  	}
> >  
> >  	pci_v3.map_irq = of_irq_parse_and_map_pci;
> > -- 
> > 2.0.4
> > 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pci" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

-- 
====================
| I would like to |
| fix the world,  |
| but they're not |
| giving me the   |
 \ source code!  /
  ---------------
    ¯\_(ツ)_/¯

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux