Re: [v2 03/17] ASoC: mediatek: mt8186: support adda in platform driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2022-02-18 at 15:54 +0100, AngeloGioacchino Del Regno wrote:
> Il 17/02/22 14:41, Jiaxin Yu ha scritto:
> > This patch adds mt8186 adda dai driver
> > 
> > Signed-off-by: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
> > ---
> >   sound/soc/mediatek/mt8186/mt8186-dai-adda.c | 891
> > ++++++++++++++++++++
> >   1 file changed, 891 insertions(+)
> >   create mode 100644 sound/soc/mediatek/mt8186/mt8186-dai-adda.c
> > 
> > diff --git a/sound/soc/mediatek/mt8186/mt8186-dai-adda.c
> > b/sound/soc/mediatek/mt8186/mt8186-dai-adda.c
> > new file mode 100644
> > index 000000000000..6d7dd1533da0
> > --- /dev/null
> > +++ b/sound/soc/mediatek/mt8186/mt8186-dai-adda.c
> > @@ -0,0 +1,891 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +//
> > +// MediaTek ALSA SoC Audio DAI ADDA Control
> > +//
> > +// Copyright (c) 2022 MediaTek Inc.
> > +// Author: Jiaxin Yu <jiaxin.yu@xxxxxxxxxxxx>
> > +
> > +#include <linux/regmap.h>
> > +#include <linux/delay.h>
> > +#include "mt8186-afe-clk.h"
> > +#include "mt8186-afe-common.h"
> > +#include "mt8186-afe-gpio.h"
> > +#include "mt8186-interconnection.h"
> > +
...snip...
> > 
> > +/* dai ops */
> > +static int mtk_dai_adda_hw_params(struct snd_pcm_substream
> > *substream,
> > +				  struct snd_pcm_hw_params *params,
> > +				  struct snd_soc_dai *dai)
> > +{
> > +	struct mtk_base_afe *afe = snd_soc_dai_get_drvdata(dai);
> > +	struct mt8186_afe_private *afe_priv = afe->platform_priv;
> > +	unsigned int rate = params_rate(params);
> > +	int id = dai->id;
> > +	struct mtk_afe_adda_priv *adda_priv = afe_priv->dai_priv[id];
> > +
> > +	dev_info(afe->dev, "%s(), id %d, stream %d, rate %d\n",
> > +		 __func__,
> > +		 id,
> > +		 substream->stream,
> > +		 rate);
> > +
> > +	if (!adda_priv) {
> > +		dev_info(afe->dev, "%s(), adda_priv == NULL",
> > __func__);
> > +		return -EINVAL;
> > +	}
> > +
> > +	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
> > +		unsigned int dl_src2_con0 = 0;
> > +		unsigned int dl_src2_con1 = 0;
> 
> This initialization is redundant: you're never using these variables
> before initializing them later, so initializing them to zero is not
> needed here.
Yes, got it. Thank you.
> 
> > +
> > +		adda_priv->dl_rate = rate;
> > +
> > +		/* set sampling rate */
> > +		dl_src2_con0 = adda_dl_rate_transform(afe, rate) <<
> > +			       DL_2_INPUT_MODE_CTL_SFT;
> > +
> > +		/* set output mode, UP_SAMPLING_RATE_X8 */
> > +		dl_src2_con0 |= (0x3 << DL_2_OUTPUT_SEL_CTL_SFT);
> > +
> > +		/* turn off mute function */
> > +		dl_src2_con0 |= (0x01 <<
> > DL_2_MUTE_CH2_OFF_CTL_PRE_SFT);
> 
> BIT() macro, please
> 
> > +		dl_src2_con0 |= (0x01 <<
> > DL_2_MUTE_CH1_OFF_CTL_PRE_SFT);
> > +
> > +		/* set voice input data if input sample rate is 8k or
> > 16k */
> > +		if (rate == 8000 || rate == 16000)
> > +			dl_src2_con0 |= 0x01 <<
> > DL_2_VOICE_MODE_CTL_PRE_SFT;
> > +
> > +		/* SA suggest apply -0.3db to audio/speech path */
> > +		dl_src2_con1 = MTK_AFE_ADDA_DL_GAIN_NORMAL <<
> > +			       DL_2_GAIN_CTL_PRE_SFT;
> > +
> > +		/* turn on down-link gain */
> > +		dl_src2_con0 |= (0x01 << DL_2_GAIN_ON_CTL_PRE_SFT);
> > +
> > +		if (id == MT8186_DAI_ADDA) {
> > +			/* clean predistortion */
> > +			regmap_write(afe->regmap, AFE_ADDA_PREDIS_CON0,
> > 0);
> > +			regmap_write(afe->regmap, AFE_ADDA_PREDIS_CON1,
> > 0);
> > +
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_DL_SRC2_CON0,
> > dl_src2_con0);
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_DL_SRC2_CON1,
> > dl_src2_con1);
> > +
> > +			/* set sdm gain */
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_DL_SDM_DCCOMP_CON,
> > +					   ATTGAIN_CTL_MASK_SFT,
> > +					   AUDIO_SDM_LEVEL_NORMAL <<
> > +					   ATTGAIN_CTL_SFT);
> > +
> > +			/* Use new 2nd sdm */
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_DL_SDM_DITHER_CON,
> > +					   AFE_DL_SDM_DITHER_64TAP_EN_M
> > ASK_SFT,
> > +					   0x1 <<
> > AFE_DL_SDM_DITHER_64TAP_EN_SFT);
> 
> BIT(AFE_DL_SDM_DITHER_64TAP_EN_SFT)
> 
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_DL_SDM_AUTO_RESET_C
> > ON,
> > +					   AFE_DL_USE_NEW_2ND_SDM_MASK_
> > SFT,
> > +					   0x1 <<
> > AFE_DL_USE_NEW_2ND_SDM_SFT);
> 
> BIT(AFE_DL_USE_NEW_2ND_SDM_SFT)
> 
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_DL_SDM_DCCOMP_CON,
> > +					   USE_3RD_SDM_MASK_SFT,
> > +					   AUDIO_SDM_2ND <<
> > USE_3RD_SDM_SFT);
> > +
> > +			/* sdm auto reset */
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_DL_SDM_AUTO_RESET_CON,
> > +				     SDM_AUTO_RESET_THRESHOLD);
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_DL_SDM_AUTO_RESET_C
> > ON,
> > +					   SDM_AUTO_RESET_TEST_ON_MASK_
> > SFT,
> > +					   0x1 <<
> > SDM_AUTO_RESET_TEST_ON_SFT);
> 
> BIT(SDM_AUTO_RESET_TEST_ON_SFT)
> 
> > +		}
> > +	} else {
> > +		unsigned int voice_mode = 0;
> 
> what about...
> 		unsigned int ul_src_con0 = 0; /* default value */
> 		unsigned int voice_mode =  adda_ul_rate_transform(afe,
> rate);
Agree with you.

> > +		unsigned int ul_src_con0 = 0;	/* default value */
> > +
> > +		adda_priv->ul_rate = rate;
> > +
> > +		voice_mode = adda_ul_rate_transform(afe, rate);
> > +
> > +		ul_src_con0 |= (voice_mode << 17) & (0x7 << 17);
> > +
> > +		/* enable iir */
> > +		ul_src_con0 |= (1 << UL_IIR_ON_TMP_CTL_SFT) &
> > +			       UL_IIR_ON_TMP_CTL_MASK_SFT;
> > +		ul_src_con0 |= (UL_IIR_SW << UL_IIRMODE_CTL_SFT) &
> > +			       UL_IIRMODE_CTL_MASK_SFT;
> > +		switch (id) {
> > +		case MT8186_DAI_ADDA:
> > +		case MT8186_DAI_AP_DMIC:
> > +			/* 35Hz @ 48k */
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_IIR_COEF_02_01,
> > 0x00000000);
> 
> Please drop leading zeroes:
> 
> regmap_write(afe->regmap, AFE_ADDA_IIR_COEF_02_01, 0);
> 
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_IIR_COEF_04_03,
> > 0x00003FB8);
> 
> ... and also please write hex in lower-case:
> 
Got it.
> regmap_write(afe->regmap,
> 	     AFE_ADDA_IIR_COEF_04_03, 0x03fb8);
> 
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_IIR_COEF_06_05,
> > 0x3FB80000);
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_IIR_COEF_08_07,
> > 0x3FB80000);
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_IIR_COEF_10_09,
> > 0x0000C048);
> > +
> > +			regmap_write(afe->regmap,
> > +				     AFE_ADDA_UL_SRC_CON0,
> > ul_src_con0);
> > +
> > +			/* Using Internal ADC */
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_TOP_CON0,
> > +					   0x1 << 0,
> > +					   0x0 << 0);
> 
> Please use the BIT() macro:
> 
> regmap_update_bits(afe->regmap, AFE_ADDA_TOP_CON0, BIT(0), 0);
> 
> P.S.: 87 columns is ok

How can I judge whether it can exceed 80 lines?
> 
> > +
> > +			/* mtkaif_rxif_data_mode = 0, amic */
> > +			regmap_update_bits(afe->regmap,
> > +					   AFE_ADDA_MTKAIF_RX_CFG0,
> > +					   0x1 << 0,
> > +					   0x0 << 0);
> 
> same here.
> 
> > +			break;
> > +		default:
> > +			break;
> > +		}
> > +
> > +		/* ap dmic */
> > +		switch (id) {
> > +		case MT8186_DAI_AP_DMIC:
> > +			mtk_adda_ul_src_dmic(afe, id);
> > +			break;
> > +		default:
> > +			break;
> > +		}
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> 
> Regards,
> Angelo
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux