Re: [PATCH v1 6/6] ARM: dts: lan966x: add basic Kontron KSwitch D10 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 2022-03-04 09:31, schrieb Claudiu.Beznea@xxxxxxxxxxxxx:
On 03.03.2022 18:03, Michael Walle wrote:
EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Add basic support for the Kontron KSwitch D10 MMT 6G-2GS which
features 6 Gigabit copper ports and two SFP cages. For now the
following is working:
 - Kernel console
 - SFP cages I2C bus and mux
 - SPI
 - SGPIO
 - Watchdog

Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
 arch/arm/boot/dts/Makefile                    |   3 +-
...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 159 ++++++++++++++++++
 2 files changed, 161 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 085c43649d44..86dd0f9804ee 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -739,7 +739,8 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
        imx7ulp-com.dtb \
        imx7ulp-evk.dtb
 dtb-$(CONFIG_SOC_LAN966) += \
-       lan966x-pcb8291.dtb
+       lan966x-pcb8291.dtb \
+       lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
        ls1021a-moxa-uc-8410a.dtb \
        ls1021a-qds.dtb \
diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
new file mode 100644
index 000000000000..958678dec7ad
--- /dev/null
+++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
+ */
+
+/dts-v1/;
+#include "lan966x.dtsi"
+
+/ {
+       model = "Kontron KSwitch D10 MMT 6G-2GS";
+ compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
+                    "microchip,lan9668", "microchip,lan966";
+
+       aliases {
+               serial0 = &usart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       gpio-restart {
+               compatible = "gpio-restart";
+               gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
+               priority = <200>;
+       };
+
+       i2cmux {
+               compatible = "i2c-mux-gpio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               mux-gpios = <&sgpio_out 3 2 GPIO_ACTIVE_HIGH>,
+                           <&sgpio_out 3 3 GPIO_ACTIVE_HIGH>;
+               i2c-parent = <&i2c4>;
+
+               i2c4_0: i2c@1 {
+                       reg = <1>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c4_1: i2c@2 {
+                       reg = <2>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+       };
+
+       sfp0: sfp0 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c4_0>;
+               los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
+               maximum-power-milliwatt = <2500>;
+               tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
+               tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
+       };
+
+       sfp1: sfp1 {
+               compatible = "sff,sfp";
+               i2c-bus = <&i2c4_1>;
+               los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
+               mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
+               maximum-power-milliwatt = <2500>;
+               tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
+               tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
+ rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>; + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&flx0 {
+       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+       status = "okay";
+};
+
+&flx3 {
+       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+       status = "okay";
+};
+
+&flx4 {
+       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+       status = "okay";
+};

Although there is 1:1 mapping b/w ids of flexcoms and the embedded blocks (flxX has usartX, i2cX, spiX) and there is nothing wrong with the approach
here I found a bit hard to follow if the correspondent embedded block
(i2c, spi, usart) is enabled or not.

I know and I had the same feeling, but I don't want to have the
subnodes (matched by name) in these nodes.  I.e. I want to avoid
something like:

&flx4 {
       atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
       status = "okay";

       i2c@600 {
              pinctrl-0 = <&fc4_b_pins>;
              pinctrl-names = "default";
              status = "okay";
       };
};

If someone renames the subnode in the dtsi, it might easily be
overlooked in the board files. Having the handle will raise an
error.

And because the node references should be sorted alphabetically
it will be cluttered around in the file. You could rename the
references to flx4_i2c though. But I don't know it its worth
the efforts. Let me know what you think.

-michael


+
+&gpio {
+       usart0_pins: usart0-pins {
+               /* RXD, TXD */
+               pins = "GPIO_25", "GPIO_26";
+               function = "fc0_b";
+       };
+
+       sgpio_a_pins: sgpio-a-pins {
+               /* SCK, D0, D1, LD */
+               pins = "GPIO_32", "GPIO_33", "GPIO_34";
+               function = "sgpio_a";
+       };
+
+       sgpio_b_pins: sgpio-b-pins {
+               /* SCK, D0, D1, LD */
+               pins = "GPIO_64";
+               function = "sgpio_b";
+       };
+
+       fc3_b_pins: fc3-b-spi-pins {
+               /* SCK, MISO, MOSI */
+               pins = "GPIO_51", "GPIO_52", "GPIO_53";
+               function = "fc3_b";
+       };
+
+       fc4_b_pins: fc4-b-i2c-pins {
+               /* RXD, TXD */
+               pins = "GPIO_57", "GPIO_58";
+               function = "fc4_b";
+       };
+};
+
+&i2c4 {
+       pinctrl-0 = <&fc4_b_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&usart0 {
+       pinctrl-0 = <&usart0_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+};
+
+&sgpio {
+       pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
+       pinctrl-names = "default";
+       bus-frequency = <8000000>;
+       /* arbitrary range because all GPIOs are in software mode */
+       microchip,sgpio-port-ranges = <0 11>;
+       status = "okay";
+};
+
+&sgpio_in {
+       ngpios = <128>;
+};
+
+&sgpio_out {
+       ngpios = <128>;
+};
+
+&spi3 {
+       pinctrl-0 = <&fc3_b_pins>;
+       pinctrl-names = "default";
+       cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
--
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux