We currently change the macro name for fu540 and fu740 by adding the
prefix respectively, these marcos are referenced by some device nodes,
they should be modified as well.
Signed-off-by: Zong Li <zong.li@xxxxxxxxxx>
Acked-by: Palmer Dabbelt <palmer@xxxxxxxxxxxx>
---
arch/riscv/boot/dts/sifive/fu540-c000.dtsi | 22 +++++++++---------
arch/riscv/boot/dts/sifive/fu740-c000.dtsi | 26 +++++++++++-----------
2 files changed, 24 insertions(+), 24 deletions(-)
diff --git a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
index 3eef52b1a59b..aad45d7f498f 100644
--- a/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu540-c000.dtsi
@@ -164,7 +164,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <4>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
dma: dma@3000000 {
@@ -180,7 +180,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <5>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -188,7 +188,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <50>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -201,7 +201,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <51>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -212,7 +212,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -222,7 +222,7 @@ qspi2: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <6>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -235,8 +235,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU540_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU540_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -246,7 +246,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <42>, <43>, <44>, <45>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -255,7 +255,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <46>, <47>, <48>, <49>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -281,7 +281,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_TLCLK>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
status = "disabled";
};
};
diff --git a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
index 8464b0e3c887..7b77c13496d8 100644
--- a/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
+++ b/arch/riscv/boot/dts/sifive/fu740-c000.dtsi
@@ -166,7 +166,7 @@ uart0: serial@10010000 {
reg = <0x0 0x10010000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <39>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
uart1: serial@10011000 {
@@ -174,7 +174,7 @@ uart1: serial@10011000 {
reg = <0x0 0x10011000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <40>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
i2c0: i2c@10030000 {
@@ -182,7 +182,7 @@ i2c0: i2c@10030000 {
reg = <0x0 0x10030000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <52>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -194,7 +194,7 @@ i2c1: i2c@10031000 {
reg = <0x0 0x10031000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <53>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
reg-shift = <2>;
reg-io-width = <1>;
#address-cells = <1>;
@@ -207,7 +207,7 @@ qspi0: spi@10040000 {
<0x0 0x20000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <41>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -218,7 +218,7 @@ qspi1: spi@10041000 {
<0x0 0x30000000 0x0 0x10000000>;
interrupt-parent = <&plic0>;
interrupts = <42>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -228,7 +228,7 @@ spi0: spi@10050000 {
reg = <0x0 0x10050000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <43>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -241,8 +241,8 @@ eth0: ethernet@10090000 {
<0x0 0x100a0000 0x0 0x1000>;
local-mac-address = [00 00 00 00 00 00];
clock-names = "pclk", "hclk";
- clocks = <&prci PRCI_CLK_GEMGXLPLL>,
- <&prci PRCI_CLK_GEMGXLPLL>;
+ clocks = <&prci FU740_PRCI_CLK_GEMGXLPLL>,
+ <&prci FU740_PRCI_CLK_GEMGXLPLL>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -252,7 +252,7 @@ pwm0: pwm@10020000 {
reg = <0x0 0x10020000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <44>, <45>, <46>, <47>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -261,7 +261,7 @@ pwm1: pwm@10021000 {
reg = <0x0 0x10021000 0x0 0x1000>;
interrupt-parent = <&plic0>;
interrupts = <48>, <49>, <50>, <51>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -287,7 +287,7 @@ gpio: gpio@10060000 {
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&prci PRCI_CLK_PCLK>;
+ clocks = <&prci FU740_PRCI_CLK_PCLK>;
status = "disabled";
};
pcie@e00000000 {
@@ -316,7 +316,7 @@ pcie@e00000000 {
<0x0 0x0 0x0 0x3 &plic0 59>,
<0x0 0x0 0x0 0x4 &plic0 60>;
clock-names = "pcie_aux";
- clocks = <&prci PRCI_CLK_PCIE_AUX>;
+ clocks = <&prci FU740_PRCI_CLK_PCIE_AUX>;
pwren-gpios = <&gpio 5 0>;
reset-gpios = <&gpio 8 0>;
resets = <&prci 4>;
--
2.31.1
