From: Chris Morgan <macromorgan@xxxxxxxxxxx>
Based on a brief discussion on the mailing list it was determined that
clock-cells should be a required parameter in the event that a consumer
of the clock gets added in an overlay.
Signed-off-by: Chris Morgan <macromorgan@xxxxxxxxxxx>
Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
---
arch/arm/boot/dts/rv1108-elgin-r1.dts | 1 +
arch/arm/boot/dts/rv1108-evb.dts | 1 +
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rv1108-elgin-r1.dts b/arch/arm/boot/dts/rv1108-elgin-r1.dts
index f62c9f7af79d..0c99a5934ebf 100644
--- a/arch/arm/boot/dts/rv1108-elgin-r1.dts
+++ b/arch/arm/boot/dts/rv1108-elgin-r1.dts
@@ -72,6 +72,7 @@ rk805: pmic@18 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
+ #clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm/boot/dts/rv1108-evb.dts b/arch/arm/boot/dts/rv1108-evb.dts
index fe5fc9bf75c9..46cad7cb94bf 100644
--- a/arch/arm/boot/dts/rv1108-evb.dts
+++ b/arch/arm/boot/dts/rv1108-evb.dts
@@ -85,6 +85,7 @@ rk805: pmic@18 {
interrupt-parent = <&gpio0>;
interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
rockchip,system-power-controller;
+ #clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index de2d3e88e27f..40bf808642b9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -160,6 +160,7 @@ pmic@18 {
pinctrl-0 = <&pmic_int_l>;
rockchip,system-power-controller;
wakeup-source;
+ #clock-cells = <0>;
vcc1-supply = <&vcc_sys>;
vcc2-supply = <&vcc_sys>;
--
2.25.1
