This adds simple polling functions for single-character transmit
and receive, as used by kgdb.
Signed-off-by: Alexey Charkov <alchark@xxxxxxxxx>
---
drivers/tty/serial/vt8500_serial.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index bfcebfd..b2bc9e8 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -566,6 +566,33 @@ static struct console vt8500_console = {
#define VT8500_CONSOLE NULL
#endif
+#ifdef CONFIG_CONSOLE_POLL
+static int vt8500_get_poll_char(struct uart_port *port)
+{
+ unsigned int status = vt8500_read(port, VT8500_URFIDX);
+
+ if (!(status & 0x1f00))
+ return NO_POLL_CHAR;
+
+ return vt8500_read(port, VT8500_RXFIFO) & 0xff;
+}
+
+static void vt8500_put_poll_char(struct uart_port *port, unsigned char c)
+{
+ unsigned int status, tmout = 10000;
+
+ do {
+ status = vt8500_read(port, VT8500_URFIDX);
+
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ } while (status & 0x10);
+
+ vt8500_write(port, c, VT8500_TXFIFO);
+}
+#endif
+
static struct uart_ops vt8500_uart_pops = {
.tx_empty = vt8500_tx_empty,
.set_mctrl = vt8500_set_mctrl,
@@ -583,6 +610,10 @@ static struct uart_ops vt8500_uart_pops = {
.request_port = vt8500_request_port,
.config_port = vt8500_config_port,
.verify_port = vt8500_verify_port,
+#ifdef CONFIG_CONSOLE_POLL
+ .poll_get_char = vt8500_get_poll_char,
+ .poll_put_char = vt8500_put_poll_char,
+#endif
};
static struct uart_driver vt8500_uart_driver = {
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
