Some factor clocks, mostly PLLs, have an extra fixed divider just before
the clock output. Add an option to the factor clk driver config data to
specify this divider.
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
drivers/clk/sunxi/clk-factors.c | 3 +++
drivers/clk/sunxi/clk-factors.h | 1 +
2 files changed, 4 insertions(+)
diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
index 2057c8a..435111d 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
@@ -64,6 +64,9 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw,
/* Calculate the rate */
rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1);
+ if (config->post_div)
+ rate /= config->post_div;
+
return rate;
}
diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h
index d2d0efa..ce70c65 100644
--- a/drivers/clk/sunxi/clk-factors.h
+++ b/drivers/clk/sunxi/clk-factors.h
@@ -16,6 +16,7 @@ struct clk_factors_config {
u8 pshift;
u8 pwidth;
u8 n_start;
+ u8 post_div;
};
struct clk_factors {
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
