From: Vinod Koul <vkoul@xxxxxxxxxx>
SM8150 SoC supports ethqos ethernet controller so add the node for it
Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
[bhsharma: Correct ethernet interrupt numbers and add power-domain]
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 6012322a5984..2ed231767535 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -915,6 +915,33 @@ gpi_dma0: dma-controller@800000 {
status = "disabled";
};
+ ethernet: ethernet@20000 {
+ compatible = "qcom,sm8150-ethqos";
+ reg = <0x0 0x00020000 0x0 0x10000>,
+ <0x0 0x00036000 0x0 0x100>;
+ reg-names = "stmmaceth", "rgmii";
+ clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
+ clocks = <&gcc GCC_EMAC_AXI_CLK>,
+ <&gcc GCC_EMAC_SLV_AHB_CLK>,
+ <&gcc GCC_EMAC_PTP_CLK>,
+ <&gcc GCC_EMAC_RGMII_CLK>;
+ interrupts = <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq", "eth_lpi";
+
+ power-domains = <&gcc EMAC_GDSC>;
+ resets = <&gcc GCC_EMAC_BCR>;
+
+ iommus = <&apps_smmu 0x3C0 0x0>;
+
+ snps,tso;
+ rx-fifo-depth = <4096>;
+ tx-fifo-depth = <4096>;
+
+ status = "disabled";
+ };
+
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x008c0000 0x0 0x6000>;
--
2.35.1
