> -----Original Message-----
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Sent: 2022年3月1日 17:09
> To: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Cc: Shawn Guo <shawnguo@xxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>; dl-linux-imx
> <linux-imx@xxxxxxx>; Marek Vasut <marex@xxxxxxx>;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> patchwork-lst@xxxxxxxxxxxxxx
> Subject: Re: [PATCH v3 5/7] arm64: dts: imx8mp: add HSIO power-domains
>
> Am Dienstag, dem 01.03.2022 um 09:13 +0200 schrieb Laurent Pinchart:
> > Hi Lucas,
> >
> > Thank you for the patch.
> >
> > On Mon, Feb 28, 2022 at 09:17:29PM +0100, Lucas Stach wrote:
> > > This adds the GPC and HSIO blk-ctrl nodes providing power control
> > > for the high-speed (USB and PCIe) IOs.
> > >
> > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Hi Lucas:
Thank you for the patch.
Based on this V3 serial patch-set. I'm trying to bring up PCIe on i.MX8MP EVK.
But I encounter system hang when access the controller's register.
Clocks are turned on refer to the /sys/kernel/debug/clk/clk_summary.
It seems that the pd of PCIe controller is not up properly.
More investigation is still on-going.
BTW, the access of PHY register is successful.
Best Regards
Richard Zhu
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 71
> > > +++++++++++++++++++++--
> > > 1 file changed, 65 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index 6b840c05dd77..69e533add539 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -4,6 +4,7 @@
> > > */
> > >
> > > #include <dt-bindings/clock/imx8mp-clock.h>
> > > +#include <dt-bindings/power/imx8mp-power.h>
> > > #include <dt-bindings/gpio/gpio.h>
> > > #include <dt-bindings/input/input.h> #include
> > > <dt-bindings/interrupt-controller/arm-gic.h>
> > > @@ -475,6 +476,44 @@ src: reset-controller@30390000 {
> > > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > > #reset-cells = <1>;
> > > };
> > > +
> > > + gpc: gpc@303a0000 {
> > > + compatible = "fsl,imx8mp-gpc";
> > > + reg = <0x303a0000 0x1000>;
> > > + interrupt-parent = <&gic>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <3>;
> > > +
> > > + pgc {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> > > + pgc_pcie_phy: power-domain@1 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
> > > + };
> > > +
> > > + pgc_usb1_phy: power-domain@2 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
> > > + };
> > > +
> > > + pgc_usb2_phy: power-domain@3 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
> > > + };
> > > +
> > > + pgc_hsiomix: power-domains@17 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
> > > + clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> > > + <&clk IMX8MP_CLK_HSIO_ROOT>;
> > > + assigned-clocks = <&clk
> IMX8MP_CLK_HSIO_AXI>;
> > > + assigned-clock-parents = <&clk
> IMX8MP_SYS_PLL2_500M>;
> > > + assigned-clock-rates = <500000000>;
> > > + };
> > > + };
> > > + };
> > > };
> > >
> > > aips2: bus@30400000 {
> > > @@ -892,6 +931,28 @@ eqos: ethernet@30bf0000 {
> > > };
> > > };
> > >
> > > + aips4 {
> >
> > I think this should be
> >
> > aips4: bus@32c00000 {
> >
> > to match the other buses. Apart from that, the patch looks good, my Rb
> > tag still applies.
>
> Urgh, apparently one shouldn't do those reworks too late in the evening. :/
>
> Shawn, would you be willing to fix this up while applying, or should I resend
> the series?
>
> Regards,
> Lucas
>
> >
> > > + compatible = "fsl,aips-bus", "simple-bus";
> > > + reg = <0x32c00000 0x400000>;
> > > + #address-cells = <1>;
> > > + #size-cells = <1>;
> > > + ranges;
> > > +
> > > + hsio_blk_ctrl: blk-ctrl@32f10000 {
> > > + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
> > > + reg = <0x32f10000 0x24>;
> > > + clocks = <&clk IMX8MP_CLK_USB_ROOT>,
> > > + <&clk IMX8MP_CLK_PCIE_ROOT>;
> > > + clock-names = "usb", "pcie";
> > > + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
> > > + <&pgc_usb1_phy>, <&pgc_usb2_phy>,
> > > + <&pgc_hsiomix>, <&pgc_pcie_phy>;
> > > + power-domain-names = "bus", "usb", "usb-phy1",
> > > + "usb-phy2", "pcie", "pcie-phy";
> > > + #power-domain-cells = <1>;
> > > + };
> > > + };
> > > +
> > > gic: interrupt-controller@38800000 {
> > > compatible = "arm,gic-v3";
> > > reg = <0x38800000 0x10000>,
> > > @@ -915,6 +976,7 @@ usb3_phy0: usb-phy@381f0040 {
> > > clock-names = "phy";
> > > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > > + power-domains = <&hsio_blk_ctrl
> IMX8MP_HSIOBLK_PD_USB_PHY1>;
> > > #phy-cells = <0>;
> > > status = "disabled";
> > > };
> > > @@ -926,6 +988,7 @@ usb3_0: usb@32f10100 {
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "hsio", "suspend";
> > > interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> @@ -939,9
> > > +1002,6 @@ usb_dwc3_0: usb@38100000 {
> > > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "bus_early", "ref", "suspend";
> > > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > > - assigned-clock-parents = <&clk
> IMX8MP_SYS_PLL2_500M>;
> > > - assigned-clock-rates = <500000000>;
> > > interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > > phys = <&usb3_phy0>, <&usb3_phy0>;
> > > phy-names = "usb2-phy", "usb3-phy"; @@ -957,6
> +1017,7 @@
> > > usb3_phy1: usb-phy@382f0040 {
> > > clock-names = "phy";
> > > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > > + power-domains = <&hsio_blk_ctrl
> IMX8MP_HSIOBLK_PD_USB_PHY2>;
> > > #phy-cells = <0>;
> > > };
> > >
> > > @@ -967,6 +1028,7 @@ usb3_1: usb@32f10108 {
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "hsio", "suspend";
> > > interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> @@ -980,9
> > > +1042,6 @@ usb_dwc3_1: usb@38200000 {
> > > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "bus_early", "ref", "suspend";
> > > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > > - assigned-clock-parents = <&clk
> IMX8MP_SYS_PLL2_500M>;
> > > - assigned-clock-rates = <500000000>;
> > > interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> > > phys = <&usb3_phy1>, <&usb3_phy1>;
> > > phy-names = "usb2-phy", "usb3-phy";
> >
>
