Add support for STMicroelectronics LIS302DL accelerometer to the st_accel framework. https://www.st.com/resource/en/datasheet/lis302dl.pdf Signed-off-by: Sicelo A. Mhlongo <absicsz@xxxxxxxxx> --- drivers/iio/accel/st_accel.h | 1 + drivers/iio/accel/st_accel_core.c | 1 + drivers/iio/accel/st_accel_i2c.c | 5 +++++ 3 files changed, 7 insertions(+) diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h index 969cc7faca07..0e79dc100ce5 100644 --- a/drivers/iio/accel/st_accel.h +++ b/drivers/iio/accel/st_accel.h @@ -36,6 +36,7 @@ #define LIS3DE_ACCEL_DEV_NAME "lis3de" #define LIS2DE12_ACCEL_DEV_NAME "lis2de12" #define LIS2HH12_ACCEL_DEV_NAME "lis2hh12" +#define LIS302DL_ACCEL_DEV_NAME "lis302dl" #ifdef CONFIG_IIO_BUFFER int st_accel_allocate_ring(struct iio_dev *indio_dev); diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 31ea19d0ba71..2a353c51c84a 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -444,6 +444,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS, .sensors_supported = { [0] = LIS331DL_ACCEL_DEV_NAME, + [1] = LIS302DL_ACCEL_DEV_NAME, }, .ch = (struct iio_chan_spec *)st_accel_8bit_channels, .odr = { diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c index c0ce78eebad9..086e8af89e18 100644 --- a/drivers/iio/accel/st_accel_i2c.c +++ b/drivers/iio/accel/st_accel_i2c.c @@ -107,6 +107,10 @@ static const struct of_device_id st_accel_of_match[] = { .compatible = "st,lis2hh12", .data = LIS2HH12_ACCEL_DEV_NAME, }, + { + .compatible = "st,lis302dl", + .data = LIS302DL_ACCEL_DEV_NAME, + }, {}, }; MODULE_DEVICE_TABLE(of, st_accel_of_match); @@ -142,6 +146,7 @@ static const struct i2c_device_id st_accel_id_table[] = { { LIS3DE_ACCEL_DEV_NAME }, { LIS2DE12_ACCEL_DEV_NAME }, { LIS2HH12_ACCEL_DEV_NAME }, + { LIS302DL_ACCEL_DEV_NAME }, {}, }; MODULE_DEVICE_TABLE(i2c, st_accel_id_table); -- 2.35.1
