Add a DT schema for describing Awinic AW8738 audio amplifiers. They are fairly simple and controlled using a single GPIO. The number of pulses during power up selects one of a few pre-defined amplifier modes. Signed-off-by: Stephan Gerhold <stephan@xxxxxxxxxxx> --- .../bindings/sound/awinic,aw8738.yaml | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/awinic,aw8738.yaml diff --git a/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml new file mode 100644 index 000000000000..83934a835fd7 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/awinic,aw8738.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/awinic,aw8738.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Awinic AW8738 Audio Amplifier + +maintainers: + - Stephan Gerhold <stephan@xxxxxxxxxxx> + +description: + The Awinic AW8738 is a simple audio amplifier using + one-wire pulse control to set the amplifier mode. + +allOf: + - $ref: name-prefix.yaml# + +properties: + compatible: + const: awinic,aw8738 + + enable-gpios: + maxItems: 1 + + awinic,mode: + description: Amplifier mode (number of pulses for one-wire pulse control) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + + sound-name-prefix: true + +required: + - compatible + - enable-gpios + - awinic,mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + audio-amplifier { + compatible = "awinic,aw8738"; + enable-gpios = <&msmgpio 114 GPIO_ACTIVE_HIGH>; + awinic,mode = <5>; + sound-name-prefix = "Speaker Amp"; + }; -- 2.35.1
