On Mon, Feb 28, 2022 at 06:00:17PM +0530, Bhupesh Sharma wrote:
> Fix the following 'make dtbs_check' warning(s) by
> using phy@ instead of lanes@ and by moving '#clock-names' to
s/clock-names/clock-cells
> sub-node:
>
> arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: ssphy@78000:
> 'lane@78200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
>
> Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> Cc: Rob Herring <robh@xxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxx>
Other than that:
Reviewed-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index 66ec5615651d..ad7914e49532 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -674,7 +674,6 @@ ssphy_0: ssphy@78000 {
> reg = <0x0 0x78000 0x0 0x1C4>;
> #address-cells = <2>;
> #size-cells = <2>;
> - #clock-cells = <1>;
> ranges;
>
> clocks = <&gcc GCC_USB0_AUX_CLK>,
> @@ -686,12 +685,13 @@ ssphy_0: ssphy@78000 {
> reset-names = "phy","common";
> status = "disabled";
>
> - usb0_ssphy: lane@78200 {
> + usb0_ssphy: phy@78200 {
> reg = <0x0 0x00078200 0x0 0x130>, /* Tx */
> <0x0 0x00078400 0x0 0x200>, /* Rx */
> <0x0 0x00078800 0x0 0x1F8>, /* PCS */
> <0x0 0x00078600 0x0 0x044>; /* PCS misc */
> #phy-cells = <0>;
> + #clock-cells = <1>;
> clocks = <&gcc GCC_USB0_PIPE_CLK>;
> clock-names = "pipe0";
> clock-output-names = "gcc_usb0_pipe_clk_src";
> --
> 2.35.1
>
