Hi Peter,
On 2/28/22 1:57 PM, Peter Geis wrote:
> [...]
>>> +
>>> +&usb_host0_xhci {
>>> + phys = <&usb2phy0_otg>;
>>> + phy-names = "usb2-phy";
>>> + extcon = <&usb2phy0>;
>>
>> I wonder what the correct place for this extcon property is. You defined
>> it on SoC (RK3566) level, in my patch for the RK3568 EVB1 it is added on
>> board level. Is this common to all RK356x variants?
>
> Yes, the usb2phy is always available as an extcon unless you make a
> device that doesn't have usb2 capability.
> In that case you'd have to override the device anyways.
> If we want to turn on default role otg here, we'd need this defined
> here as well or things break.
OK, so it seems to me that the extcon could or should enter the
rk356x.dtsi (and can be removed from the rk3566.dtsi and the
rk3568-evb1-v10.dts in this series). Is that correct?
Best regards,
Michael
> [...]
