Broadcom ns2 platform has spi-cpol and spi-cpho properties set incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are of flag or boolean type and not integer type. Fix the values. CC: Ray Jui <rjui@xxxxxxxxxxxx> CC: Scott Branden <sbranden@xxxxxxxxxxxx> CC: Florian Fainelli <f.fainelli@xxxxxxxxx> Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2) Signed-off-by: Kuldeep Singh <singh.kuldeep87k@xxxxxxxxx> --- Hi, This patch is on top of git://github.com/broadcom/cygnus-linux.git, master branch which is not updated since 4.14 kernel. Hope the reference is correct. Thanks! arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts index ec19fbf928a1..12a4b1c03390 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dts @@ -111,8 +111,8 @@ compatible = "silabs,si3226x"; reg = <0>; spi-max-frequency = <5000000>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; @@ -135,8 +135,8 @@ at25,byte-len = <0x8000>; at25,addr-mode = <2>; at25,page-size = <64>; - spi-cpha = <1>; - spi-cpol = <1>; + spi-cpha; + spi-cpol; pl022,hierarchy = <0>; pl022,interface = <0>; pl022,slave-tx-disable = <0>; -- 2.25.1
