Update the input GPIO that indicates Host ready. Link: https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md#host-ready Signed-off-by: Quan Nguyen <quan@xxxxxxxxxxxxxxxxxxxxxx> Signed-off-by: Thang Q. Nguyen <thang@xxxxxxxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts index c2b5b3dfeb85..a823571f8f4b 100644 --- a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts @@ -860,7 +860,7 @@ &gpio { /*E0-E7*/ "","","","","","","","", /*F0-F7*/ "","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD", "S1_DDR_SAVE","","", - /*G0-G7*/ "S0_FW_BOOT_OK","SHD_REQ_L","","S0_OVERTEMP_L","","", + /*G0-G7*/ "host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","", "","", /*H0-H7*/ "","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","", /*I0-I7*/ "PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT", -- 2.28.0
