Hi Sakari,
On Sun, Feb 27, 2022 at 11:07:23PM +0200, Sakari Ailus wrote:
> On Sun, Feb 27, 2022 at 10:33:51PM +0200, Laurent Pinchart wrote:
> > Add a new dt-bindings/media/video-interfaces.h header that defines
> > macros corresponding to the bus types from media/video-interfaces.yaml.
> > This allows avoiding hardcoded constants in device tree sources.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > ---
> > include/dt-bindings/media/video-interfaces.h | 16 ++++++++++++++++
> > 1 file changed, 16 insertions(+)
> > create mode 100644 include/dt-bindings/media/video-interfaces.h
> >
> > diff --git a/include/dt-bindings/media/video-interfaces.h b/include/dt-bindings/media/video-interfaces.h
> > new file mode 100644
> > index 000000000000..e38058e1cca7
> > --- /dev/null
> > +++ b/include/dt-bindings/media/video-interfaces.h
> > @@ -0,0 +1,16 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > + */
> > +
> > +#ifndef __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__
> > +#define __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__
> > +
> > +#define MEDIA_BUS_TYPE_CSI2_CPHY 1
> > +#define MEDIA_BUS_TYPE_CSI1 2
> > +#define MEDIA_BUS_TYPE_CCP2 3
> > +#define MEDIA_BUS_TYPE_CSI2_DPHY 4
> > +#define MEDIA_BUS_TYPE_PARALLEL 5
>
> I've been long thinkin of renaming "PARALLEL" as "BT.601" which it really
> is. I don't mind postponing that, but I think you could as well start here.
> Up to you.
I think it's a good idea, but we then need to decide what to do with
other types of parallel buses. Let's start this discussion now, and
implement it in a patch on top of this series.
> Should this be somehow visible in video-interfaces.yaml?
I wish we could use macros in .yaml files instead of numerical values,
but I don't think that's possible. I can do this:
bus-type:
$ref: /schemas/types.yaml#/definitions/uint32
enum:
- - 1 # MIPI CSI-2 C-PHY
- - 2 # MIPI CSI1
- - 3 # CCP2
- - 4 # MIPI CSI-2 D-PHY
- - 5 # Parallel
- - 6 # BT.656
+ - 1 # MIPI CSI-2 C-PHY (MEDIA_BUS_TYPE_CSI2_CPHY)
+ - 2 # MIPI CSI1 (MEDIA_BUS_TYPE_CSI1)
+ - 3 # CCP2 (MEDIA_BUS_TYPE_CCP2)
+ - 4 # MIPI CSI-2 D-PHY (MEDIA_BUS_TYPE_CSI2_DPHY)
+ - 5 # Parallel (MEDIA_BUS_TYPE_PARALLEL)
+ - 6 # BT.656 (MEDIA_BUS_TYPE_BT656)
description:
- Data bus type.
+ Data bus type. Use the macros listed above (defined in
+ dt-bindings/video-interfaces.h) instead of numerical values.
Any better proposal ?
> > +#define MEDIA_BUS_TYPE_BT656 6
> > +
> > +#endif /* __DT_BINDINGS_MEDIA_VIDEO_INTERFACES_H__ */
--
Regards,
Laurent Pinchart
