Re: [PATCH V3 2/3] dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells

[Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>]

On 18/02/2022 07:07, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@xxxxxxxxxx>
>
> NVRAM doesn't have cells at hardcoded addresses. They are stored in
> internal struct (custom & dynamic format). It's still important to
> define relevant cells in DT so NVMEM consumers can reference them.
>
> Update binding to allow including basic cells as NVMEM device subnodes.
>
> Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>

Applied thanks,

--srini

> ---
> V2: Add children nodes description per Rob's request
> V3: Document NVMEM cells as properties
> ---
>   .../devicetree/bindings/nvmem/brcm,nvram.yaml | 25 +++++++++++++++++--
>   1 file changed, 23 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> index 8c3f0cd22821..25033de3ef6b 100644
> --- a/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/brcm,nvram.yaml
> @@ -14,6 +14,8 @@ description: |
>     NVRAM can be accessed on Broadcom BCM47xx MIPS and Northstar ARM Cortex-A9
>     devices usiong I/O mapped memory.
>   
> +  NVRAM variables can be defined as NVMEM device subnodes.
> +
>   maintainers:
>     - Rafał Miłecki <rafal@xxxxxxxxxx>
>   
> @@ -27,11 +29,30 @@ properties:
>     reg:
>       maxItems: 1
>   
> +  board_id:
> +    type: object
> +    description: Board identification name
> +
> +  et0macaddr:
> +    type: object
> +    description: First Ethernet interface's MAC address
> +
> +  et1macaddr:
> +    type: object
> +    description: Second Ethernet interface's MAC address
> +
> +  et2macaddr:
> +    type: object
> +    description: Third Ethernet interface's MAC address
> +
>   unevaluatedProperties: false
>   
>   examples:
>     - |
>       nvram@1eff0000 {
> -            compatible = "brcm,nvram";
> -            reg = <0x1eff0000 0x10000>;
> +        compatible = "brcm,nvram";
> +        reg = <0x1eff0000 0x10000>;
> +
> +        mac: et0macaddr {
> +        };
>       };