Hi all, This series introduces the USB 3.0 xHCI controller nodes and enables them on the RK3568 EVB1. While USB 3.0 host and gadget operation have been tested successfully on the EVB1, the dtbs_check complains about several issues. However, since several issues pop up with RK3399 dtbs as well there might be something strange with the binding and/or existing board dts files. In this regard I could use a few pointers. Looking forward to your comments! Best regards, Michael Michael Riesch (2): arm64: dts: rockchip: add the usb3 nodes to rk356x arm64: dts: rockchip: add usb3 support to rk3568-evb1-v10 .../boot/dts/rockchip/rk3568-evb1-v10.dts | 49 ++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3568.dtsi | 5 ++ arch/arm64/boot/dts/rockchip/rk356x.dtsi | 58 +++++++++++++++++++ 3 files changed, 112 insertions(+) -- 2.30.2
