On Thu, Feb 17, 2022 at 05:55:53PM +0100, Dario Binacchi wrote: > It allows to change the M06/M12 default scan rate. > > Co-developed-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> > Signed-off-by: Dario Binacchi <dario.binacchi@xxxxxxxxxxxxxxxxxxxx> > --- > > (no changes since v1) > > .../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > index 2e8da7470513..aa8517c6f65b 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml > @@ -85,6 +85,14 @@ properties: > minimum: 0 > maximum: 80 > > + report-rate: Use property unit suffix: report-rate-hz This should probably be moved to touchscreen.yaml as it seems common. > + description: Allows setting the scan rate. > + M06 supports range from 3 (30 Hz) to 14 (140 Hz). You're using 3 or 30 in this case? Should be 30, but it's not clear. I'd just list the range in Hz and leave the conversion detail to the driver. > + M12 supports range from 1 (1 Hz) to 255 (255 Hz). Use '|' if formatting (newline) is significant. > + $ref: /schemas/types.yaml#/definitions/uint32 > + minimum: 1 > + maximum: 255 > + > touchscreen-size-x: true > touchscreen-size-y: true > touchscreen-fuzz-x: true > -- > 2.32.0 > >
