Re: [PATCH v2 09/15] scsi: ufs: deprecate 'freq-table-hz' property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed 23 Feb 03:15 CST 2022, Krzysztof Kozlowski wrote:

> On 22/02/2022 19:16, Bjorn Andersson wrote:
> > On Tue 22 Feb 06:58 PST 2022, Krzysztof Kozlowski wrote:
> > 
> >> The 'freq-table-hz' is not correct in DT schema, because '-hz' suffix
> >> defines uint32 type, not an array.  Therefore deprecate 'freq-table-hz'
> >> and use 'freq-table' instead.
> >>
> > 
> > Patch looks good in itself, but why don't we use opp-table to describe
> > the performance states?
> > 
> > In particular looking at the two columns of frequencies for various
> > Qualcomm boards they require different performance-states.
> > 
> > A concrete example is sm8350.dtsi, which specifies 75MHz and 300MHz as
> > the first frequency pair. The lower level requires the VDD_CX power rail
> > to be at least &rpmhpd_opp_low_svs, the higher frequency has a
> > required-opps of &rpmhpd_opp_nom.
> > 
> > 
> > As this isn't possible to express in the current binding we've just been
> > forced to always run at a higher voltage level and kept this in the todo
> > list.
> > 
> > But rather than migrating freq-table-hz to freq-table and then having to
> > introduce an opp table to express the power constraints, could we
> > perhaps skip the intermediate step?
> > 
> > Or would you have any other suggestion about how we can represent the
> > required-opps level together with the freq-table (if that's what we want
> > to stick with).
> 
> Usage of OPP tables is interesting solution. It would solve your problem
> of power rail levels. This would need several opp-tables - one for each
> clock, which is not a big problem.
> 

Ahh, so we can only have a single clock, but multiple regulators and
interconnect paths tied to the opp table.

We have a couple of cases where it would have been nice to be able to
key the opp-table off some index (e.g. the UFS gear or PCI Gen) and
control multiple clocks. So I think we need to look into this further...

> The problem is that I do not have any UFS hardware (none of my Samsung
> Exynos boards have UFS... I don't have even arm64 Exynos chips :( ), so
> implementing it theoretically will be painful.
> OTOH, I believe that having a working dtschema is very useful. Having
> dtschema without errors/warnings is even worth some churn/intermediary work.
> 
> The intermediary work is also not that big. Once proper OPP is
> implemented, we will have "just" two deprecated properties in the bindings.
> 

Fair enough, was just hoping to avoid the middle step. But that's fine,
we'll continue to carry this on our todo list then.

Thanks,
Bjorn



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux