On 08/02/2022 at 11:56, Tudor Ambarus wrote:
Describe and enable the AES, SHA and TDES crypto IPs. Tested with the extra run-time self tests of the registered crypto algorithms. Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx> Reviewed-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> Queued for 5.18. Best regards, Nicolas
--- v4: use the generic "crypto" node name for all the crypto nodes, as recommended by the DT specification. Add Claudiu's R-b tag. v3: remove explicit status = "okay", as it's already the default case when not specified at all. v2: - add label to the tdes node - update commit description and specify testing method - put clocks and clock-names properties before dmas and dma-names because the clocks are mandatory, while DMA is optional for TDES and SHA arch/arm/boot/dts/sama7g5.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/sama7g5.dtsi b/arch/arm/boot/dts/sama7g5.dtsi index 7972cb8c2562..2453a6901313 100644 --- a/arch/arm/boot/dts/sama7g5.dtsi +++ b/arch/arm/boot/dts/sama7g5.dtsi @@ -393,6 +393,27 @@ pit64b1: timer@e1804000 { clock-names = "pclk", "gclk"; };+ aes: crypto@e1810000 {+ compatible = "atmel,at91sam9g46-aes"; + reg = <0xe1810000 0x100>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>; + clock-names = "aes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(1)>, + <&dma0 AT91_XDMAC_DT_PERID(2)>; + dma-names = "tx", "rx"; + }; + + sha: crypto@e1814000 { + compatible = "atmel,at91sam9g46-sha"; + reg = <0xe1814000 0x100>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 83>; + clock-names = "sha_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(48)>; + dma-names = "tx"; + }; + flx0: flexcom@e1818000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe1818000 0x200>; @@ -475,6 +496,17 @@ trng: rng@e2010000 { status = "disabled"; };+ tdes: crypto@e2014000 {+ compatible = "atmel,at91sam9g46-tdes"; + reg = <0xe2014000 0x100>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pmc PMC_TYPE_PERIPHERAL 96>; + clock-names = "tdes_clk"; + dmas = <&dma0 AT91_XDMAC_DT_PERID(54)>, + <&dma0 AT91_XDMAC_DT_PERID(53)>; + dma-names = "tx", "rx"; + }; + flx4: flexcom@e2018000 { compatible = "atmel,sama5d2-flexcom"; reg = <0xe2018000 0x200>;
-- Nicolas Ferre
