Dtschema expects GPIO hogs to end with a "hog" suffix.
Also, the convention for node names is to use hyphens, not underscores.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
To be queued in renesas-devel for v5.18.
---
arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 2 +-
arch/arm64/boot/dts/renesas/hihope-common.dtsi | 2 +-
arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi | 2 +-
arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts | 2 +-
arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts | 4 ++--
arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi | 4 ++--
arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi | 2 +-
7 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 17d5c4501bbe184c..877d076ffcc9bf92 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -77,7 +77,7 @@ &extalr_clk {
};
&gpio6 {
- usb_hub_reset {
+ usb-hub-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-high;
diff --git a/arch/arm64/boot/dts/renesas/hihope-common.dtsi b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
index 0c7e6f79059020ff..935d06515aa6130b 100644
--- a/arch/arm64/boot/dts/renesas/hihope-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-common.dtsi
@@ -140,7 +140,7 @@ &extalr_clk {
};
&gpio6 {
- usb1-reset {
+ usb1-reset-hog {
gpio-hog;
gpios = <10 GPIO_ACTIVE_LOW>;
output-low;
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
index 40c5e8d6d8418910..d66d17e34694c871 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex-lvds.dtsi
@@ -20,7 +20,7 @@ &gpio1 {
* When GP1_20 is LOW LVDS0 is connected to the LVDS connector
* When GP1_20 is HIGH LVDS0 is connected to the LT8918L
*/
- lvds-connector-en-gpio {
+ lvds-connector-en-hog {
gpio-hog;
gpios = <20 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
index a7b27d09f6c25fa1..c1812d1ef06a302a 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-idk-2121wr.dts
@@ -68,7 +68,7 @@ &gpio0 {
* When GP0_17 is low LVDS[01] are connected to the LVDS connector
* When GP0_17 is high LVDS[01] are connected to the LT8918L
*/
- lvds-connector-en-gpio{
+ lvds-connector-en-hog {
gpio-hog;
gpios = <17 GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
index 49d141db53f7af37..fc334b4c2aa422ee 100644
--- a/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a07g054l2-smarc.dts
@@ -18,8 +18,8 @@ / {
};
&pinctrl {
- /delete-node/ can0-stb;
- /delete-node/ can1-stb;
+ /delete-node/ can0-stb-hog;
+ /delete-node/ can1-stb-hog;
/delete-node/ gpio-sd0-pwr-en-hog;
/delete-node/ sd0-dev-sel-hog;
/delete-node/ sd1-pwr-en-hog;
diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
index 2ef217445f72dae0..9085d8c76ce15452 100644
--- a/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-pinfunction.dtsi
@@ -18,7 +18,7 @@ can0_pins: can0 {
};
/* SW7 should be at position 2->3 so that GPIO8_CAN0_STB line is activated */
- can0-stb {
+ can0-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 2) GPIO_ACTIVE_HIGH>;
output-low;
@@ -31,7 +31,7 @@ can1_pins: can1 {
};
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
- can1-stb {
+ can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(42, 3) GPIO_ACTIVE_HIGH>;
output-low;
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
index bff56d69693667f1..37ff2091582ec966 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc-pinfunction.dtsi
@@ -34,7 +34,7 @@ scif1_pins: scif1 {
#if SW_RSPI_CAN
/* SW8 should be at position 2->3 so that GPIO9_CAN1_STB line is activated */
- can1-stb {
+ can1-stb-hog {
gpio-hog;
gpios = <RZG2L_GPIO(44, 3) GPIO_ACTIVE_HIGH>;
output-low;
--
2.25.1
