On Tue, 22 Feb 2022, Oleksii Moisieiev wrote:
> On Tue, Feb 22, 2022 at 04:14:40PM +0000, Sudeep Holla wrote:
> > On Tue, Feb 22, 2022 at 09:06:25AM +0100, Krzysztof Kozlowski wrote:
> > > On 21/02/2022 22:39, Oleksii Moisieiev wrote:
> > > > Hi Krzysztof,
> > > >
> > > > On Mon, Feb 21, 2022 at 10:01:43PM +0100, Krzysztof Kozlowski wrote:
> > > >> On 21/02/2022 18:26, Oleksii Moisieiev wrote:
> > > >>> Introducing new parameter called scmi_devid to the device-tree bindings.
> > > >>> This parameter should be set for the device nodes, which has
> > > >>> clocks/power-domains/resets working through SCMI.
> > > >>> Given parameter should set the device_id, needed to set device
> > > >>> permissions in the Firmware. This feature will be extremely useful for
> > > >>> the virtualized systems, which has more that one Guests running on the
> > > >>> system at the same time or for the syestems, which require several
> > > >>> agents with different permissions. Trusted agent will use scmi_devid to
> > > >>> set the Device permissions for the Firmware (See Section 4.2.2.10 [0]
> > > >>> for details).
> > > >>> Agents concept is described in Section 4.2.1 [0].
> > > >>>
> > > >>> scmi_devid in Device-tree node example:
> > > >>> usb@e6590000
> > > >>> {
> > > >>> scmi_devid = <19>;
> > > >>> clocks = <&scmi_clock 3>, <&scmi_clock 2>;
> > > >>> resets = <&scmi_reset 10>, <&scmi_reset 9>;
> > > >>> power-domains = <&scmi_power 0>;
> > > >>> };
> > > >>
> > > >> And how do you prevent DT overlay adding such devid to any other node
> > > >> thus allowing any other device to send requests with given devid?
> > > >>
> > > > Thank you for the quick response.
> > > > scmi_devid value will be used only by Trusted Agent when the device
> > > > permissions are set. Non-trusted agents, which in our case are
> > > > represented as Guest OS are using scmi drivers, already present in linux
> > > > kernel, ignores scmi_devid and uses scmi_clocks, scmi_power, scmi_reset
> > > > nodes to access to SCMI protocol.
> > >
> > > Ah, ok.
> > >
> > > >
> > > >> Plus few technicalities:
> > > >> 1. Hyphen, not underscore in property name, so scmi-devid.
> > > >
> > > > Thanks for the tip, I will change that in v2.
> > >
> > > Few more thoughts:
> > > 1. This looks specific to ARM SCMI, so you also need vendor prefix, so
> > > something like:
> > > arm,scmi-devid
> > > arm,scmi-device-id
> > >
> >
> > Keeping the other discussion separate, I wanted to comment on this.
> > I agree with Krzysztof on having vendor specific prefix if we decide to add
> > this device id thing. However, I prefer not to use "arm,scmi-" here.
> > It can be "xen,scmi-" as we had plans to introduce some concepts in SCMI
> > spec that may use looks like this device-id. I would just like to avoid
> > conflicting with that in the future. It may happen to be same in the future
> > (i.e. this xen device-id matches 100% with definition of device-id we might
> > introduce in the spec, but I want to make assumption otherwise and leave
> > scope for divergence however small/little it can be). No issues even if
> > they converge and match 100% later in the far future.
> >
>
> xem,scmi- works for me. What do other thinks?
^ xen,scmi-
If this problem was Xen specific, then it would be fine to use xen,scmi-
As Xen developer, it solves my problem and I am fine with it.
However, from a device tree and SCMI point of view, it looks like this
problem is generic and it just happens that Xen is the first
implementation to encounter it.
Cristian wrote: "The SCMI spec does not indeed cover the discovery of
such devices and the related associated resources: it indeed delegates
such description to FDT/ACPI as of now." How is that supposed to happen
today with the current DT definitions, regardless of Xen? Is it a gap in
the current device tree binding?
