On Mon, 21 Feb 2022 17:26:47 +0000, Oleksii Moisieiev wrote: > Document scmi_devid property for the devices, using SCMI protocol > to work with clocks/resets/power-domains etc. This property is intended > to set the device id, which should be used to manage device permissions > in the firmware. Device permissions management is descibed in DEN 0056, > Section 4.2.2.10 [0]. > > This property is useful for the virtualized systems, when several agents > are running on the same platform. Agent term is descibed in Section > 4.1.1 [0]. > > [0] https://developer.arm.com/documentation/den0056/latest > > Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@xxxxxxxx> > --- > .../bindings/firmware/arm,scmi-devid.yaml | 41 +++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 Documentation/devicetree/bindings/firmware/arm,scmi-devid.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/firmware/arm,scmi-devid.example.dt.yaml: example-0: usb@ee0a0000:reg:0: [0, 3993632768, 0, 256] is too long From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/1595720 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
