Re: [PATCH v8 13/19] drm/mediatek: dpi: Add dpintf support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Il 18/02/22 15:54, Guillaume Ranquet ha scritto:
dpintf is the displayport interface hardware unit. This unit is similar
to dpi and can reuse most of the code.

This patch adds support for mt8195-dpintf to this dpi driver. Main
differences are:
  - Some features/functional components are not available for dpintf
    which are now excluded from code execution once is_dpintf is set
  - dpintf can and needs to choose between different clockdividers based
    on the clockspeed. This is done by choosing a different clock parent.
  - There are two additional clocks that need to be managed. These are
    only set for dpintf and will be set to NULL if not supplied. The
    clk_* calls handle these as normal clocks then.
  - Some register contents differ slightly between the two components. To
    work around this I added register bits/masks with a DPINTF_ prefix
    and use them where different.

Based on a separate driver for dpintf created by
Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
---
  drivers/gpu/drm/mediatek/mtk_dpi.c          | 164 +++++++++++++++++---
  drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  38 +++++
  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 +
  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
  drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
  include/linux/soc/mediatek/mtk-mmsys.h      |   2 +
  6 files changed, 198 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index be99399faf1bb..c5639ada868f8 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -63,6 +63,14 @@ enum mtk_dpi_out_color_format {
  	MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
  };
+enum TVDPLL_CLK {
+	TVDPLL_PLL = 0,
+	TVDPLL_D2 = 2,
+	TVDPLL_D4 = 4,
+	TVDPLL_D8 = 8,
+	TVDPLL_D16 = 16,
+};
+
  struct mtk_dpi {
  	struct drm_encoder encoder;
  	struct drm_bridge bridge;
@@ -71,8 +79,10 @@ struct mtk_dpi {
  	void __iomem *regs;
  	struct device *dev;
  	struct clk *engine_clk;
+	struct clk *dpi_ck_cg;
  	struct clk *pixel_clk;
  	struct clk *tvd_clk;
+	struct clk *pclk_src[5];
  	int irq;
  	struct drm_display_mode mode;
  	const struct mtk_dpi_conf *conf;
@@ -126,6 +136,7 @@ struct mtk_dpi_conf {
  	const u32 *output_fmts;
  	u32 num_output_fmts;
  	bool is_ck_de_pol;
+	bool is_dpintf;
  	bool swap_input_support;
  	// Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift)
  	u32 dimension_mask;
@@ -384,6 +395,25 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
  		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
  }
+static void mtk_dpi_matrix_sel(struct mtk_dpi *dpi, enum mtk_dpi_out_color_format format)
+{
+	u32 matrix_sel = 0;
+
+	switch (format) {
+	case MTK_DPI_COLOR_FORMAT_YCBCR_422:
+	case MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL:
+	case MTK_DPI_COLOR_FORMAT_YCBCR_444:
+	case MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL:
+	case MTK_DPI_COLOR_FORMAT_XV_YCC:
+		if (dpi->mode.hdisplay <= 720)
+			matrix_sel = 0x2;
+		break;
+	default:
+		break;
+	}
+	mtk_dpi_mask(dpi, DPI_MATRIX_SET, matrix_sel, INT_MATRIX_SEL_MASK);
+}
+
  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
  					enum mtk_dpi_out_color_format format)
  {
@@ -391,6 +421,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
  	    (format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
  		mtk_dpi_config_yuv422_enable(dpi, false);
  		mtk_dpi_config_csc_enable(dpi, true);
+		mtk_dpi_matrix_sel(dpi, format);
  		if (dpi->conf->swap_input_support)
  			mtk_dpi_config_swap_input(dpi, false);
  		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
@@ -398,6 +429,7 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
  		   (format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
  		mtk_dpi_config_yuv422_enable(dpi, true);
  		mtk_dpi_config_csc_enable(dpi, true);
+		mtk_dpi_matrix_sel(dpi, format);
  		if (dpi->conf->swap_input_support)
  			mtk_dpi_config_swap_input(dpi, true);
  		mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
@@ -438,6 +470,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
  	mtk_dpi_disable(dpi);
  	clk_disable_unprepare(dpi->pixel_clk);
  	clk_disable_unprepare(dpi->engine_clk);
+	clk_disable_unprepare(dpi->dpi_ck_cg);
+	clk_disable_unprepare(dpi->tvd_clk);
  }
static int mtk_dpi_power_on(struct mtk_dpi *dpi)
@@ -447,12 +481,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
  	if (++dpi->refcount != 1)
  		return 0;
+ ret = clk_prepare_enable(dpi->tvd_clk);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
+		goto err_pixel;
+	}
+
  	ret = clk_prepare_enable(dpi->engine_clk);
  	if (ret) {
  		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
  		goto err_refcount;
  	}
+ ret = clk_prepare_enable(dpi->dpi_ck_cg);
+	if (ret) {
+		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
+		goto err_ck_cg;
+	}
+
  	ret = clk_prepare_enable(dpi->pixel_clk);
  	if (ret) {
  		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
@@ -462,10 +508,11 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
  	if (dpi->pinctrl && dpi->pins_dpi)
  		pinctrl_select_state(dpi->pinctrl, dpi->pins_dpi);
- mtk_dpi_enable(dpi);
  	return 0;
err_pixel:
+	clk_disable_unprepare(dpi->dpi_ck_cg);
+err_ck_cg:
  	clk_disable_unprepare(dpi->engine_clk);
  err_refcount:
  	dpi->refcount--;
@@ -497,12 +544,21 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
  	pll_rate = clk_get_rate(dpi->tvd_clk);
vm.pixelclock = pll_rate / factor;
-	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
-	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
+	if (dpi->conf->is_dpintf) {
+		if (factor == 1)
+			clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
+		else if (factor == 2)
+			clk_set_parent(dpi->pixel_clk, dpi->pclk_src[3]);
+		else if (factor == 4)
+			clk_set_parent(dpi->pixel_clk, dpi->pclk_src[4]);
+		else
+			clk_set_parent(dpi->pixel_clk, dpi->pclk_src[2]);
+	} else if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
+		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
  		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
-	else
+	} else {
  		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
-
+	}
vm.pixelclock = clk_get_rate(dpi->pixel_clk); @@ -515,9 +571,15 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
  			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
  	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
  			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
-	hsync.sync_width = vm.hsync_len;
-	hsync.back_porch = vm.hback_porch;
-	hsync.front_porch = vm.hfront_porch;
+	if (dpi->conf->is_dpintf) {
+		hsync.sync_width = vm.hsync_len / 4;
+		hsync.back_porch = vm.hback_porch / 4;
+		hsync.front_porch = vm.hfront_porch / 4;
+	} else {
+		hsync.sync_width = vm.hsync_len;
+		hsync.back_porch = vm.hback_porch;
+		hsync.front_porch = vm.hfront_porch;
+	}

I would propose the following, instead:

	hsync.sync_width = vm.hsync_len;
	hsync.back_porch = vm.hback_porch;
	hsync.front_porch = vm.hfront_porch;

	/*
	 * For DPINTF, we need to divide everything by 4 because of this,
	 * that and the other reason.
	 */
	if (dpi->conf->is_dpintf) {
		hsync.sync_width /= 4;
		hsync.back_porch /= 4;
		hsync.front_porch /= 4;
	}

  	hsync.shift_half_line = false;
  	vsync_lodd.sync_width = vm.vsync_len;
  	vsync_lodd.back_porch = vm.vback_porch;
@@ -559,13 +621,20 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
  	mtk_dpi_config_channel_limit(dpi);
  	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
  	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
-	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
  	mtk_dpi_config_color_format(dpi, dpi->color_format);
-	mtk_dpi_config_2n_h_fre(dpi);
-	mtk_dpi_dual_edge(dpi);
-	mtk_dpi_config_disable_edge(dpi);
+	if (dpi->conf->is_dpintf) {
+		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
+			     DPINTF_INPUT_2P_EN);
+	} else {
+		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
+		mtk_dpi_config_2n_h_fre(dpi);
+		mtk_dpi_dual_edge(dpi);
+		mtk_dpi_config_disable_edge(dpi);
+	}
  	mtk_dpi_sw_reset(dpi, false);
+ mtk_dpi_enable(dpi);
+
  	return 0;
  }
@@ -608,7 +677,6 @@ static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
  	u32 *input_fmts;
*num_input_fmts = 0;
-

Why are you removing this line? imo, it's fine to have it.

  	input_fmts = kcalloc(1, sizeof(*input_fmts),
  			     GFP_KERNEL);
  	if (!input_fmts)
@@ -634,15 +702,18 @@ static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
  		if (dpi->conf->num_output_fmts)
  			out_bus_format = dpi->conf->output_fmts[0];
- dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
-		bridge_state->input_bus_cfg.format,
-		bridge_state->output_bus_cfg.format);
+	dev_info(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
+		 bridge_state->input_bus_cfg.format,
+		 bridge_state->output_bus_cfg.format);

This is definitely debugging information, and has to be kept as such.

dpi->output_fmt = out_bus_format;
  	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
  	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
  	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
-	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
+	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
+		dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
+	else
+		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
return 0;
  }
@@ -687,7 +758,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
  {
  	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
- if (mode->clock > dpi->conf->max_clock_khz)
+	if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
  		return MODE_CLOCK_HIGH;
return MODE_OK;
@@ -801,6 +872,16 @@ static unsigned int mt8183_calculate_factor(int clock)
  		return 2;
  }
+static unsigned int mt8195_dpintf_calculate_factor(int clock)
+{
+	if (clock < 70000)
+		return 4;
+	else if (clock < 200000)
+		return 2;
+	else
+		return 1;
+}
+
  static const u32 mt8173_output_fmts[] = {
  	MEDIA_BUS_FMT_RGB888_1X24,
  };
@@ -810,6 +891,12 @@ static const u32 mt8183_output_fmts[] = {
  	MEDIA_BUS_FMT_RGB888_2X12_BE,
  };
+static const u32 mt8195_output_fmts[] = {
+	MEDIA_BUS_FMT_RGB888_1X24,
+	MEDIA_BUS_FMT_YUV8_1X24,
+	MEDIA_BUS_FMT_YUYV8_1X16,
+};
+
  static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
  	.c_bottom = 0x0010,
  	.c_top = 0x0FE0,
@@ -817,6 +904,13 @@ static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
  	.y_top = 0x0FE0,
  };
+static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
+	.c_bottom = 0x0000,
+	.c_top = 0xFFF,
+	.y_bottom = 0x0000,
+	.y_top = 0xFFF,
+};
+
  static const struct mtk_dpi_conf mt8173_conf = {
  	.cal_factor = mt8173_calculate_factor,
  	.reg_h_fre_con = 0xe0,
@@ -882,6 +976,19 @@ static const struct mtk_dpi_conf mt8192_conf = {
  	.limit = &mtk_dpi_limit,
  };
+static const struct mtk_dpi_conf mt8195_dpintf_conf = {
+	.cal_factor = mt8195_dpintf_calculate_factor,
+	.output_fmts = mt8195_output_fmts,
+	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
+	.is_dpintf = true,
+	.dimension_mask = DPINTF_HPW_MASK,
+	.hvsize_mask = DPINTF_HSIZE_MASK,
+	.channel_swap_shift = DPINTF_CH_SWAP,
+	.yuv422_en_bit = DPINTF_YUV422_EN,
+	.csc_enable_bit = DPINTF_CSC_ENABLE,
+	.limit = &mtk_dpintf_limit,
+};
+
  static int mtk_dpi_probe(struct platform_device *pdev)
  {
  	struct device *dev = &pdev->dev;
@@ -929,7 +1036,18 @@ static int mtk_dpi_probe(struct platform_device *pdev)
  	if (IS_ERR(dpi->engine_clk)) {
  		ret = PTR_ERR(dpi->engine_clk);
  		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Failed to get engine clock: %d\n", ret);
+			dev_err(dev, "Failed to get engine clock: %d\n",
+				ret);

Why are you breaking this line? It fits! :)

+
+		return ret;
+	}
+
+	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
+	if (IS_ERR(dpi->dpi_ck_cg)) {
+		ret = PTR_ERR(dpi->dpi_ck_cg);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to get dpi ck cg clock: %d\n",
+				ret);

ditto

return ret;
  	}
@@ -952,6 +1070,11 @@ static int mtk_dpi_probe(struct platform_device *pdev)
  		return ret;
  	}
+ dpi->pclk_src[1] = devm_clk_get(dev, "TVDPLL_D2");
+	dpi->pclk_src[2] = devm_clk_get(dev, "TVDPLL_D4");
+	dpi->pclk_src[3] = devm_clk_get(dev, "TVDPLL_D8");
+	dpi->pclk_src[4] = devm_clk_get(dev, "TVDPLL_D16");

	if (dpi->conf->is_dpintf) {
		dpi->pclk_src[1] = devm_clk_get(.....);
		if (IS_ERR(dpi->pclk_src[1]))
			return dpi->pclk_src[1];

		dpi->pclk_src[2] = ..... (blahblah, etc)
	}

or, you can also do (but I'm undecided on that)

	if (dpi->conf->is_dpintf) {
		for (........) {
			dpi->pclk_src[...........
			if (IS_ERR....)
				return .....
		}
	}

It's your choice.... as long as you correctly error-check these calls.

Thanks,
Angelo



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux