Dnia Fri, Feb 18, 2022 at 07:09:07AM -0800, Guenter Roeck napisał(a):
From: Agathe Porte <agathe.porte@xxxxxxxxx> Add basic description of the tmp464 driver DT bindings. Signed-off-by: Agathe Porte <agathe.porte@xxxxxxxxx> Cc: Krzysztof Adamski <krzysztof.adamski@xxxxxxxxx> Signed-off-by: Guenter Roeck <linux@xxxxxxxxxxxx> --- v5: - Dropped ti,n-factor from channel@0 example. Added additional channel to examples to show positive ti,n-factor property. v4: - No changes v3: - Addedd support for TMP468. - Changed number of channels from 0..3 (which was wrong anyway) to 0..8. - Changed value range for ti,n-factor to int8, with an example for a negative value. - Added myself as driver maintainer. .../devicetree/bindings/hwmon/ti,tmp464.yaml | 114 ++++++++++++++++++ MAINTAINERS | 7 ++ 2 files changed, 121 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml new file mode 100644 index 000000000000..14f6a3412b8c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ti,tmp464.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/hwmon/ti,tmp464.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TMP464 and TMP468 temperature sensors + +maintainers: + - Agathe Porte <agathe.porte@xxxxxxxxx> + +description: | + ±0.0625°C Remote and Local temperature sensor + https://www.ti.com/lit/ds/symlink/tmp464.pdf + https://www.ti.com/lit/ds/symlink/tmp468.pdf + +properties: + compatible: + enum: + - ti,tmp464 + - ti,tmp468 + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + "^channel@([0-8])$": + type: object + description: | + Represents channels of the device and their specific configuration. + + properties: + reg: + description: | + The channel number. 0 is local channel, 1-8 are remote channels. + items: + minimum: 0 + maximum: 8 + + label: + description: | + A descriptive name for this channel, like "ambient" or "psu". + + ti,n-factor: + description: | + The value (two's complement) to be programmed in the channel specific N correction register. + For remote channels only. + $ref: /schemas/types.yaml#/definitions/int8 + items: + minimum: -128 + maximum: 127
I still thing we should have the same format here and in tmp421, for consistency. If use the same property name, "ti,n-factor" but on tmp421 you have use 32bit value while here you have to use 8bit (which is weird in DT, BTW), it might be confusing. Back when we did this for TMP421, there was some discussion and we settled on this approach, why do it differently now? Krzysztof
