Hi Lucas,
On Sun, Feb 20, 2022 at 07:56:11AM +0200, Laurent Pinchart wrote:
> On Sat, Feb 19, 2022 at 09:40:50AM +0200, Laurent Pinchart wrote:
> > On Mon, Feb 07, 2022 at 08:25:45PM +0100, Lucas Stach wrote:
> > > This adds the GPC and HSIO blk-ctrl nodes providing power control for
> > > the high-speed (USB and PCIe) IOs.
> > >
> > > Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 63 ++++++++++++++++++++---
> > > 1 file changed, 57 insertions(+), 6 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index 6b840c05dd77..dc488a147d0c 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -4,6 +4,7 @@
> > > */
> > >
> > > #include <dt-bindings/clock/imx8mp-clock.h>
> > > +#include <dt-bindings/power/imx8mp-power.h>
> > > #include <dt-bindings/gpio/gpio.h>
> > > #include <dt-bindings/input/input.h>
> > > #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > @@ -475,6 +476,44 @@ src: reset-controller@30390000 {
> > > interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
> > > #reset-cells = <1>;
> > > };
> > > +
> > > + gpc: gpc@303a0000 {
> > > + compatible = "fsl,imx8mp-gpc";
> > > + reg = <0x303a0000 0x10000>;
> >
> > According to the reference manual, the GPC occupies 4kB, not 64kB.
> >
> > > + interrupt-parent = <&gic>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <3>;
> > > +
> > > + pgc {
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > +
> >
> > We're working on support for the MEDIAMIX power domains, which we'll
> > rebase on top of this. In case the HSIO part still needs more work,
> > could you split this patch in two, with one patch that adds the PGC,
> > with an empty pgc nodde, and a second patch that adds the HSIO-related
> > power domains ? The first one could then be merged faster (it would be
> > great if it could get in v5.18).
> >
> > > + pgc_pcie_phy: power-domain@1 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_PCIE_PHY>;
> > > + };
> > > +
> > > + pgc_usb1_phy: power-domain@2 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_USB1_PHY>;
> > > + };
> > > +
> > > + pgc_usb2_phy: power-domain@3 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_USB2_PHY>;
> > > + };
> > > +
> > > + pgc_hsiomix: power-domains@17 {
> > > + #power-domain-cells = <0>;
> > > + reg = <IMX8MP_POWER_DOMAIN_HSIOMIX>;
> > > + clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
> > > + <&clk IMX8MP_CLK_HSIO_ROOT>;
> > > + assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > > + assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > > + assigned-clock-rates = <500000000>;
> > > + };
> > > + };
> > > + };
> > > };
> > >
> > > aips2: bus@30400000 {
> > > @@ -908,6 +947,20 @@ ddr-pmu@3d800000 {
> > > interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > > };
> > >
> > > + hsio_blk_ctrl: blk-ctrl@32f10000 {
> > > + compatible = "fsl,imx8mp-hsio-blk-ctrl", "syscon";
> > > + reg = <0x32f10000 0x24>;
> > > + clocks = <&clk IMX8MP_CLK_USB_ROOT>,
> > > + <&clk IMX8MP_CLK_PCIE_ROOT>;
> > > + clock-names = "usb", "pcie";
> > > + power-domains = <&pgc_hsiomix>, <&pgc_hsiomix>,
> > > + <&pgc_usb1_phy>, <&pgc_usb2_phy>,
> > > + <&pgc_hsiomix>, <&pgc_pcie_phy>;
> >
> > Would it be useful to rework the driver to avoid specifying the same
> > parent power domain multiple times in DT ?
> >
> > > + power-domain-names = "bus", "usb", "usb-phy1",
> > > + "usb-phy2", "pcie", "pcie-phy";
> > > + #power-domain-cells = <1>;
> > > + };
>
> Shouldn't this be in an aips4 node ?
With the reg size fixed, and this device moved to an aips4 node,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > > +
> > > usb3_phy0: usb-phy@381f0040 {
> > > compatible = "fsl,imx8mp-usb-phy";
> > > reg = <0x381f0040 0x40>;
> > > @@ -915,6 +968,7 @@ usb3_phy0: usb-phy@381f0040 {
> > > clock-names = "phy";
> > > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY1>;
> > > #phy-cells = <0>;
> > > status = "disabled";
> > > };
> > > @@ -926,6 +980,7 @@ usb3_0: usb@32f10100 {
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "hsio", "suspend";
> > > interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> > > @@ -939,9 +994,6 @@ usb_dwc3_0: usb@38100000 {
> > > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "bus_early", "ref", "suspend";
> > > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > > - assigned-clock-rates = <500000000>;
> > > interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
> > > phys = <&usb3_phy0>, <&usb3_phy0>;
> > > phy-names = "usb2-phy", "usb3-phy";
> > > @@ -957,6 +1009,7 @@ usb3_phy1: usb-phy@382f0040 {
> > > clock-names = "phy";
> > > assigned-clocks = <&clk IMX8MP_CLK_USB_PHY_REF>;
> > > assigned-clock-parents = <&clk IMX8MP_CLK_24M>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB_PHY2>;
> > > #phy-cells = <0>;
> > > };
> > >
> > > @@ -967,6 +1020,7 @@ usb3_1: usb@32f10108 {
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "hsio", "suspend";
> > > interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
> > > + power-domains = <&hsio_blk_ctrl IMX8MP_HSIOBLK_PD_USB>;
> > > #address-cells = <1>;
> > > #size-cells = <1>;
> > > dma-ranges = <0x40000000 0x40000000 0xc0000000>;
> > > @@ -980,9 +1034,6 @@ usb_dwc3_1: usb@38200000 {
> > > <&clk IMX8MP_CLK_USB_CORE_REF>,
> > > <&clk IMX8MP_CLK_USB_ROOT>;
> > > clock-names = "bus_early", "ref", "suspend";
> > > - assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
> > > - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
> > > - assigned-clock-rates = <500000000>;
> > > interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
> > > phys = <&usb3_phy1>, <&usb3_phy1>;
> > > phy-names = "usb2-phy", "usb3-phy";
> > >
--
Regards,
Laurent Pinchart
