[PATCH v8 1/7] dt-bindings: pinctrl: qcom: Update lpass lpi file name to SoC specific

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Change generic lpass lpi pincotrol bindings file to SoC specific file,
to distinguish and accomadate other SoC specific dt bindings.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@xxxxxxxxxxx>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@xxxxxxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
 .../bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml   | 133 ---------------------
 .../pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml     | 133 +++++++++++++++++++++
 2 files changed, 133 insertions(+), 133 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
deleted file mode 100644
index 5c5542f..0000000
--- a/Documentation/devicetree/bindings/pinctrl/qcom,lpass-lpi-pinctrl.yaml
+++ /dev/null
@@ -1,133 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/qcom,lpass-lpi-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
-  Low Power Island (LPI) TLMM block
-
-maintainers:
-  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
-
-description: |
-  This binding describes the Top Level Mode Multiplexer block found in the
-  LPASS LPI IP on most Qualcomm SoCs
-
-properties:
-  compatible:
-    const: qcom,sm8250-lpass-lpi-pinctrl
-
-  reg:
-    minItems: 2
-    maxItems: 2
-
-  clocks:
-    items:
-      - description: LPASS Core voting clock
-      - description: LPASS Audio voting clock
-
-  clock-names:
-    items:
-      - const: core
-      - const: audio
-
-  gpio-controller: true
-
-  '#gpio-cells':
-    description: Specifying the pin number and flags, as defined in
-      include/dt-bindings/gpio/gpio.h
-    const: 2
-
-  gpio-ranges:
-    maxItems: 1
-
-#PIN CONFIGURATION NODES
-patternProperties:
-  '-pins$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-    $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
-    properties:
-      pins:
-        description:
-          List of gpio pins affected by the properties specified in this
-          subnode.
-        items:
-          oneOf:
-            - pattern: "^gpio([0-9]|[1-9][0-9])$"
-        minItems: 1
-        maxItems: 14
-
-      function:
-        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
-                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
-                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
-                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
-                dmic3_data, i2s2_data ]
-        description:
-          Specify the alternative function to be configured for the specified
-          pins.
-
-      drive-strength:
-        enum: [2, 4, 6, 8, 10, 12, 14, 16]
-        default: 2
-        description:
-          Selects the drive strength for the specified pins, in mA.
-
-      slew-rate:
-        enum: [0, 1, 2, 3]
-        default: 0
-        description: |
-            0: No adjustments
-            1: Higher Slew rate (faster edges)
-            2: Lower Slew rate (slower edges)
-            3: Reserved (No adjustments)
-
-      bias-pull-down: true
-
-      bias-pull-up: true
-
-      bias-disable: true
-
-      output-high: true
-
-      output-low: true
-
-    required:
-      - pins
-      - function
-
-    additionalProperties: false
-
-allOf:
-  - $ref: "pinctrl.yaml#"
-
-required:
-  - compatible
-  - reg
-  - clocks
-  - clock-names
-  - gpio-controller
-  - '#gpio-cells'
-  - gpio-ranges
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/sound/qcom,q6afe.h>
-    lpi_tlmm: pinctrl@33c0000 {
-        compatible = "qcom,sm8250-lpass-lpi-pinctrl";
-        reg = <0x33c0000 0x20000>,
-              <0x3550000 0x10000>;
-        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
-                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
-        clock-names = "core", "audio";
-        gpio-controller;
-        #gpio-cells = <2>;
-        gpio-ranges = <&lpi_tlmm 0 0 14>;
-    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
new file mode 100644
index 0000000..06efb13
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-lpass-lpi-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Low Power Audio SubSystem (LPASS)
+  Low Power Island (LPI) TLMM block
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  LPASS LPI IP on most Qualcomm SoCs
+
+properties:
+  compatible:
+    const: qcom,sm8250-lpass-lpi-pinctrl
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: LPASS Core voting clock
+      - description: LPASS Audio voting clock
+
+  clock-names:
+    items:
+      - const: core
+      - const: audio
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "/schemas/pinctrl/pincfg-node.yaml"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9])$"
+        minItems: 1
+        maxItems: 14
+
+      function:
+        enum: [ gpio, swr_tx_clk, qua_mi2s_sclk, swr_tx_data, qua_mi2s_ws,
+                qua_mi2s_data, swr_rx_clk, swr_rx_data, dmic1_clk, i2s1_clk,
+                dmic1_data, i2s1_ws, dmic2_clk, dmic2_data, i2s1_data,
+                i2s2_clk, wsa_swr_clk, i2s2_ws, wsa_swr_data, dmic3_clk,
+                dmic3_data, i2s2_data ]
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      slew-rate:
+        enum: [0, 1, 2, 3]
+        default: 0
+        description: |
+            0: No adjustments
+            1: Higher Slew rate (faster edges)
+            2: Lower Slew rate (slower edges)
+            3: Reserved (No adjustments)
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/sound/qcom,q6afe.h>
+    lpi_tlmm: pinctrl@33c0000 {
+        compatible = "qcom,sm8250-lpass-lpi-pinctrl";
+        reg = <0x33c0000 0x20000>,
+              <0x3550000 0x10000>;
+        clocks = <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+                 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+        clock-names = "core", "audio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&lpi_tlmm 0 0 14>;
+    };
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux