using LVDS channel 1 on an i.MX53 leads to following error:
imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1
This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
reparenting di1 clock to ldb_di1. The value of the mux param comes from device
tree port settings.
On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
respectively)
Documentation update suggested by Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Markus Niebel <Markus.Niebel@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/staging/imx-drm/ldb.txt | 15 +++++++++++++--
arch/arm/boot/dts/imx53.dtsi | 12 ++++++++++--
2 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index 578a1fc..443bcb6 100644
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -56,6 +56,9 @@ Required properties:
- fsl,data-width : should be <18> or <24>
- port: A port node with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ On i.MX5, the internal two-input-multiplexer is used.
+ Due to hardware limitations, only one port (port@[0,1])
+ can be used for each channel (lvds-channel@[0,1], respectively)
On i.MX6, there should be four ports (port@[0-3]) that correspond
to the four LVDS multiplexer inputs.
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
"di0", "di1";
lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
/* ... */
};
- port {
+ port@0 {
+ reg = <0>;
+
lvds0_in: endpoint {
remote-endpoint = <&ipu_di0_lvds0>;
};
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
};
lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
fsl,data-mapping = "spwg";
fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
/* ... */
};
- port {
+ port@1 {
+ reg = <1>;
+
lvds1_in: endpoint {
remote-endpoint = <&ipu_di1_lvds1>;
};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 6456a00..1a2202d 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -419,10 +419,14 @@
status = "disabled";
lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <0>;
status = "disabled";
- port {
+ port@0 {
+ reg = <0>;
+
lvds0_in: endpoint {
remote-endpoint = <&ipu_di0_lvds0>;
};
@@ -430,10 +434,14 @@
};
lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
reg = <1>;
status = "disabled";
- port {
+ port@1 {
+ reg = <1>;
+
lvds1_in: endpoint {
remote-endpoint = <&ipu_di1_lvds1>;
};
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
