This series adds initial support for MSM8953 (and SDM632 which is based on MSM8953) and the Fairphone 3 smartphone. Only relatively basic functionality is supported like storage, volume keys and USB. There is currently close-to-mainline support for other components for this SoC including GPU, WiFi and audio, this series adds only basic support so that the other components can start getting upstreamed easier. Changes in v2: - rebase on linux-next and drop already applied patches - drop msm8953-pm8953.dtsi patch: integrate changes into FP3 patch - for individual patches for other changes Luca Weiss (7): dt-bindings: mfd: qcom,tcsr: Document msm8953 compatible dt-bindings: thermal: tsens: Add msm8953 compatible dt-bindings: usb: qcom,dwc3: Add msm8953 compatible dt-bindings: arm: cpus: Add Kryo 250 CPUs rpmsg: smd: allow opening rpm_requests even if already opened dt-bindings: arm: qcom: Document sdm632 and fairphone,fp3 board arm64: dts: qcom: sdm632: Add device tree for Fairphone 3 Vladimir Lypak (3): arm64: dts: qcom: Add MSM8953 device tree arm64: dts: qcom: Add PM8953 PMIC arm64: dts: qcom: Add SDM632 device tree .../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../devicetree/bindings/mfd/qcom,tcsr.txt | 1 + .../bindings/thermal/qcom-tsens.yaml | 1 + .../devicetree/bindings/usb/qcom,dwc3.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8953.dtsi | 1326 +++++++++++++++++ arch/arm64/boot/dts/qcom/pm8953.dtsi | 90 ++ .../boot/dts/qcom/sdm632-fairphone-fp3.dts | 183 +++ arch/arm64/boot/dts/qcom/sdm632.dtsi | 81 + drivers/rpmsg/qcom_smd.c | 5 +- 11 files changed, 1695 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/qcom/msm8953.dtsi create mode 100644 arch/arm64/boot/dts/qcom/pm8953.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm632.dtsi -- 2.35.1
