Hi Peter,
Am 13.02.22 um 23:56 schrieb Peter Robinson:
> This enables V3D for bcm2711 (used in the Raspberry Pi 4).
>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
> Signed-off-by: Peter Robinson <pbrobinson@xxxxxxxxx>
> ---
> Changes since v3:
> - Minor updates for rebase
>
> Changes since v1:
> - Correct node's name address
>
> arch/arm/boot/dts/bcm2711.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
> index 171fc5d2acef..9514c0ba481c 100644
> --- a/arch/arm/boot/dts/bcm2711.dtsi
> +++ b/arch/arm/boot/dts/bcm2711.dtsi
> @@ -551,6 +551,18 @@ genet_mdio: mdio@e14 {
> #size-cells = <0x0>;
> };
> };
> +
> + v3d: gpu@7ec00000 {
> + compatible = "brcm,bcm2711-v3d";
> + reg = <0x0 0x7ec00000 0x4000>,
> + <0x0 0x7ec04000 0x4000>;
> + reg-names = "hub", "core0";
> +
> + power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
> + resets = <&pm BCM2835_RESET_V3D>;
> + clocks = <&firmware_clocks 5>;
please move the firmware clock usage to bcm2711-rpi.dtsi, because it's
not defined here.
Best regards
> + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> + };
> };
> };
>
