The OSPI flash nodes are missing a space before the opening brace. Fix
that.
Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx>
---
Only compile-tested.
arch/arm64/boot/dts/ti/k3-am642-evm.dts | 2 +-
arch/arm64/boot/dts/ti/k3-am642-sk.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 2 +-
arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index e94ae178b1ae..edf80e277267 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -498,7 +498,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index a9785bec12df..30b956276060 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -369,7 +369,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 34724440171a..7d819f0db8df 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -256,7 +256,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 2d7596911b27..2ecc4541f6d8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -482,7 +482,7 @@ &ospi1 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi1_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 2fee2906183d..990dfcd61018 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -171,7 +171,7 @@ &ospi0 {
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
- flash@0{
+ flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
--
2.34.1
