[PATCH 0/4] misc: Add power-efuse driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

This patch series is another incarnation of some previous efforts [0]
at enabling userspace access to the OPERATION state (and now status
flags) of PMBus devices, specifically with respect to efuses
protecting general-purpose power outputs.  This functionality is an
important component enabling a port of OpenBMC to the Delta AHE-50DC
Open19 power shelf [1].

The first patch extends the pmbus core's regulator support with an
implementation of the .get_error_flags() operation, mapping PMBus
status flags to REGULATOR_ERROR_* flags where possible, and the second
patch adds regulator support for the lm25066 driver.  These two
patches are essentially independent of the power-efuse driver (and
each other) and could potentially be applicable individually, but are
necessary for the power-efuse driver to be useful on the AHE-50DC.

The third and fourth patches add dt-bindings and the implementation of
the power-efuse driver, respectively.  The driver is fairly simple; it
merely provides a sysfs interface to enable, disable, and retrieve
error flags from an underlying regulator.

There is one aspect of its usage of the regulator API I'm a bit
uncertain about, however: this driver seems like a case where an
exclusive 'get' of the regulator (i.e. devm_regulator_get_exclusive()
instead of devm_regulator_get() in efuse_probe()) would be
appropriate, since in the intended usage no other device should be
using an efuse's regulator.  With an exclusive get though, the
regulator's use_count and the consumer's enable_count don't balance
out properly to allow the enable/disable operations to work properly
(the former ending up one more than the latter, leading to
enable_count underflows on attempts to disable the regulator).  So at
least for now it's using a non-exclusive get -- I'd be happy to hear
any pointers on a way to allow an exclusive get to work here, though.


Thanks,
Zev

[0] https://lore.kernel.org/openbmc/YGLepYLvtlO6Ikzs@xxxxxxxxxxxxxxxxxxxxxxxx/
[1] https://www.open19.org/marketplace/delta-16kw-power-shelf/

Zev Weiss (4):
  hwmon: (pmbus) Add get_error_flags support to regulator ops
  hwmon: (pmbus) lm25066: Add regulator support
  dt-bindings: Add power-efuse binding
  misc: Add power-efuse driver

 .../devicetree/bindings/misc/power-efuse.yaml |  37 +++
 MAINTAINERS                                   |   5 +
 drivers/hwmon/pmbus/Kconfig                   |   7 +
 drivers/hwmon/pmbus/lm25066.c                 |  14 ++
 drivers/hwmon/pmbus/pmbus_core.c              |  97 ++++++++
 drivers/misc/Kconfig                          |  15 ++
 drivers/misc/Makefile                         |   1 +
 drivers/misc/power-efuse.c                    | 221 ++++++++++++++++++
 8 files changed, 397 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/power-efuse.yaml
 create mode 100644 drivers/misc/power-efuse.c

-- 
2.35.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux