Convert the MediaTek UART APDMA Controller binding to DT schema.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
v3: Removed anyOf condition
v2: Fixed interrupt maxItems to 16, added interrupts/reg maxItems constraint
to 8 when the dma-requests property is not present
.../bindings/dma/mediatek,uart-dma.yaml | 122 ++++++++++++++++++
.../bindings/dma/mtk-uart-apdma.txt | 56 --------
2 files changed, 122 insertions(+), 56 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
delete mode 100644 Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
new file mode 100644
index 000000000000..54d68fc688b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/mediatek,uart-dma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek UART APDMA controller
+
+maintainers:
+ - Long Cheng <long.cheng@xxxxxxxxxxxx>
+
+description: |
+ The MediaTek UART APDMA controller provides DMA capabilities
+ for the UART peripheral bus.
+
+allOf:
+ - $ref: "dma-controller.yaml#"
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - mediatek,mt2712-uart-dma
+ - mediatek,mt8516-uart-dma
+ - const: mediatek,mt6577-uart-dma
+ - enum:
+ - mediatek,mt6577-uart-dma
+
+ reg:
+ minItems: 1
+ maxItems: 16
+
+ interrupts:
+ description: |
+ TX, RX interrupt lines for each UART APDMA channel
+ minItems: 1
+ maxItems: 16
+
+ clocks:
+ description: Must contain one entry for the APDMA main clock
+ maxItems: 1
+
+ clock-names:
+ const: apdma
+
+ "#dma-cells":
+ const: 1
+ description: |
+ The first cell specifies the UART APDMA channel number
+
+ dma-requests:
+ description: |
+ Number of virtual channels of the UART APDMA controller
+ maximum: 16
+
+ mediatek,dma-33bits:
+ type: boolean
+ description: Enable 33-bits UART APDMA support
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+if:
+ not:
+ required:
+ - dma-requests
+then:
+ properties:
+ interrupts:
+ maxItems: 8
+ reg:
+ maxItems: 8
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/mt2712-clk.h>
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ apdma: dma-controller@11000400 {
+ compatible = "mediatek,mt2712-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000400 0 0x80>,
+ <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000680 0 0x80>,
+ <0 0x11000700 0 0x80>,
+ <0 0x11000780 0 0x80>,
+ <0 0x11000800 0 0x80>,
+ <0 0x11000880 0 0x80>,
+ <0 0x11000900 0 0x80>,
+ <0 0x11000980 0 0x80>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <12>;
+ clocks = <&pericfg CLK_PERI_AP_DMA>;
+ clock-names = "apdma";
+ mediatek,dma-33bits;
+ #dma-cells = <1>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt b/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
deleted file mode 100644
index fef9c1eeb264..000000000000
--- a/Documentation/devicetree/bindings/dma/mtk-uart-apdma.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Mediatek UART APDMA Controller
-
-Required properties:
-- compatible should contain:
- * "mediatek,mt2712-uart-dma" for MT2712 compatible APDMA
- * "mediatek,mt6577-uart-dma" for MT6577 and all of the above
- * "mediatek,mt8516-uart-dma", "mediatek,mt6577" for MT8516 SoC
-
-- reg: The base address of the APDMA register bank.
-
-- interrupts: A single interrupt specifier.
- One interrupt per dma-requests, or 8 if no dma-requests property is present
-
-- dma-requests: The number of DMA channels
-
-- clocks : Must contain an entry for each entry in clock-names.
- See ../clocks/clock-bindings.txt for details.
-- clock-names: The APDMA clock for register accesses
-
-- mediatek,dma-33bits: Present if the DMA requires support
-
-Examples:
-
- apdma: dma-controller@11000400 {
- compatible = "mediatek,mt2712-uart-dma",
- "mediatek,mt6577-uart-dma";
- reg = <0 0x11000400 0 0x80>,
- <0 0x11000480 0 0x80>,
- <0 0x11000500 0 0x80>,
- <0 0x11000580 0 0x80>,
- <0 0x11000600 0 0x80>,
- <0 0x11000680 0 0x80>,
- <0 0x11000700 0 0x80>,
- <0 0x11000780 0 0x80>,
- <0 0x11000800 0 0x80>,
- <0 0x11000880 0 0x80>,
- <0 0x11000900 0 0x80>,
- <0 0x11000980 0 0x80>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 105 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 107 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 110 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 112 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
- dma-requests = <12>;
- clocks = <&pericfg CLK_PERI_AP_DMA>;
- clock-names = "apdma";
- mediatek,dma-33bits;
- #dma-cells = <1>;
- };
--
2.33.1
