On 16/02/2022 19:17, Sui Jingfeng wrote: > From: suijingfeng <suijingfeng@xxxxxxxxxxx> > > The display controller is a pci device, its PCI vendor id is 0x0014 > its PCI device id is 0x7a06. > > 1) In order to let the lsdc kms driver to know which chip the DC is > contained in, we add different compatible for different chip. > > 2) Add display controller device node for ls2k1000 SoC > > Signed-off-by: suijingfeng <suijingfeng@xxxxxxxxxxx> > Signed-off-by: Sui Jingfeng <15330273260@xxxxxx> > --- > .../loongson/loongson,display-controller.yaml | 114 ++++++++++++++++++ > .../display/loongson/loongson-drm.txt | 16 +++ Please split dt-bindings from other changes into a separate patch, which should be first in the series. > .../boot/dts/loongson/loongson64-2k1000.dtsi | 8 ++ > arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +- > 4 files changed, 140 insertions(+), 5 deletions(-) > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson-drm.txt > > diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > new file mode 100644 > index 000000000000..64d8364b50ab > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml > @@ -0,0 +1,114 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/pci0014,7a06.yaml# The file name looks different than ID. Does this pass `make dt_binding_check` validation? > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Loongson LS7A2000/LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings > + > +maintainers: > + - Sui Jingfeng <suijingfeng@xxxxxxxxxxx> > + > +description: |+ > + > + Loongson display controllers are simple which require scanout buffers > + to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system > + memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped > + with a dedicated video ram which is 64MB or more. > + > + For LS7A1000, there are 4 dedicated GPIOs whose control register is > + located at the DC register space. They are used to emulate two way i2c, > + One for DVO0, another for DVO1. > + > + LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either > + general purpose GPIO emulated i2c or hardware i2c in the SoC. > + > + LSDC has two display pipes, each way has a DVO interface which provide > + RGB888 signals, vertical & horizontal synchronisations, data enable and > + the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from > + 1920x1080 resolution at 60Hz. Each CRTC has two FB address registers. > + > + LSDC's display pipeline have several components as below description, > + > + The display controller in LS7A1000: > + ___________________ _________ > + | -------| | | > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monotor | > + | _ _ -------| ^ ^ |_________| > + | | | | | -------| | | > + | |_| |_| | i2c0 <--------+-------------+ > + | -------| > + | DC IN LS7A1000 | > + | _ _ -------| > + | | | | | | i2c1 <--------+-------------+ > + | |_| |_| -------| | | _________ > + | -------| | | | | > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > + | -------| |_________| > + |___________________| > + > + Simple usage of LS7A1000 with LS3A4000 CPU: > + > + +------+ +-----------------------------------+ > + | DDR4 | | +-------------------+ | > + +------+ | | PCIe Root complex | LS7A1000 | > + || MC0 | +--++---------++----+ | > + +----------+ HT 3.0 | || || | > + | LS3A4000 |<-------->| +---++---+ +--++--+ +---------+ +------+ > + | CPU |<-------->| | GC1000 | | LSDC |<-->| DDR3 MC |<->| VRAM | > + +----------+ | +--------+ +-+--+-+ +---------+ +------+ > + || MC1 +---------------|--|----------------+ > + +------+ | | > + | DDR4 | +-------+ DVO0 | | DVO1 +------+ > + +------+ VGA <--|ADV7125|<--------+ +-------->|TFP410|--> DVI/HDMI > + +-------+ +------+ > + > + The display controller in LS2K1000/LS2K0500: > + ___________________ _________ > + | -------| | | > + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monotor | > + | _ _ -------| ^ ^ |_________| > + | | | | | | | | > + | |_| |_| | +------+ | > + | <---->| i2c0 |<---------+ > + | DC IN LS2K1000 | +------+ > + | _ _ | +------+ > + | | | | | <---->| i2c1 |----------+ > + | |_| |_| | +------+ | _________ > + | -------| | | | | > + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel | > + | -------| |_________| > + |___________________| > + > +properties: > + compatible: > + enum: > + - loongson,ls7a2000-dc > + - loongson,ls7a1000-dc > + - loongson,ls2k1000-dc > + - loongson,ls2k0500-dc > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 You need also maxItems. If you have only one interrupt, then just maxItems:1. > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +examples: > + - | > + lsdc: dc@6,1 { node name should be generic: "display-controller" The unit address does not look like matching the reg property. Is this how it suppose to be? > + compatible = "loongson,ls7a1000-dc"; > + reg = <0x3100 0x0 0x0 0x0 0x0>; > + interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&pic>; > + }; > + > +... Best regards, Krzysztof
